GDDR: La actualización a z/OS 2.5 hace que los sistemas de control de GDDR y anomalías se ejecuten en modo degradado
Summary: La actualización a z/OS 2.5 provoca anomalías en el reinicio en caso de desastres dispersos geográficamente (GDDR) y los sistemas de control de GDDR (C-SYS) se ejecutan en modo degradado. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
El software operativo de mainframe se actualiza al nivel de software de z/OS 2.5 con tolerancia de mantenimiento. z/OS 2.5 se utiliza para una nueva CPU IBM z16.
GDDR GDDRMAIN se inició con varios ABEND después de que se aplicó el mantenimiento de z/OS:
- HBM informa el siguiente error en el inicio de GDDRMAIN, el host de GDDR está en modo degradado:
ABEND S0E0-29
- GDDRRPT informa el siguiente error en el apagado de GDDRMAIN:
ABEND S0E0-28
Se muestran los siguientes mensajes de error en la salida del Monitor de eventos (EVM) y el Monitor de latidos (HBM) de GDDR:
GDDUG86E No matching GDDR systems found
Si la solicitud en ABEND S0E0-28 ocurre en el apagado de GDDRMAIN, entonces un Abend S067-04 puede ocurrir si se vuelve a activar GDDRMAIN.
Cause
Un
Además, un
ABEND S0E0-29 puede ocurrir al iniciar GDDRMAIN en la subtarea HBM en el módulo GDDREVMI, compensación 0005AF74.
PSW 183158F0 0010D507 3000F154Esto hace que la subtarea HBM finalice y deja a GDDRMAIN sin funcionalidades de monitoreo de latidos. El host de GDDR se ejecuta en modo degradado. GDDREVMI se actualiza para borrar REGISTER AR15 antes de usar el registro a fin de evitar un
ABEND S0E0-29.
Además, un
ABEND S0E0-28 puede ocurrir en GDDRRPT tras el apagado de GDDRMAIN en GDDRMAIN, compensación 0006EAB2.
PSW D24FD37A 1000D207 D37D5004GDDRRPT se actualizó para borrar REGISTER AR1 a fin de evitar un
ABEND S0E0-28. GDDRMAIN se actualiza para verificar que el token de entrada de lista de acceso (ALET) del espacio de datos 2 sea válido. Esta acción se realiza antes de acceder al espacio de datos de otra instancia de GDDR. Esta acción ayuda a evitar un Abend S067-04 en el inicio de GDDRMAIN debido a que otra instancia de GDDR no se apaga limpiamente.Resolution
Solución alternativa:
- Ninguno para ABEND S0E0-29, pero los hosts de GDDR continúan ejecutándose en modo degradado.
- Se requiere una carga de programa inicial (IPL) de la partición lógica (LPAR) para borrar la memoria si se
Abend S067-04Ocurre.
Corrección permanente:
- Para GDDR 6.0, la corrección temporal del programa (PTF) GD60004 y GD60005 están disponibles para su descarga desde el soporte de Dell.
- Para GDDR 6.1, el problema se resuelve en el producto base. Está disponible para descargar desde el soporte de Dell.
Additional Information
Descripción de la corrección temporal del programa (PTF):
++PTF(GD60004) REWORK(2022315) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3459
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: Warning message GDDUG24W results in
* RC 8 on pre-script and post-script
* configuration displays
*
* DESCRIPTION DETAIL:
*
* During GDDR scripts, warning message GDDUG24W could result
* in an RC 8 on the pre-script and post-script configuration
* displays, for example:
*
* GDDUG24W 2 external RDF groups indicate SRDF/A active
* GDDR639I GDDR Completed pre-script configuration display
* with rc 8
*
* This is simply a messaging issue, as a non-zero RC on the
* configuration displays does not affect the outcome of the
* script.
*
* PROBLEM RESOLUTION:
*
* Warning message GDDUG24W will now result in an RC 4 on the
* configuration displays, as expected.
*
* MODULES: GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3460 GDDR-3472
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS067-04 upon GDDRMAIN startup due
* to another GDDR instance not shutting
* down cleanly
*
* DESCRIPTION DETAIL:
*
* An S067-04 abend could occur upon GDDRMAIN startup at
* GDDRMAIN offset 000006AC (data at PSW 4038B219 02009540
* 50E8B219) if another GDDR instance was not shut down
* cleanly. This causes GDDRMAIN to terminate.
*
* PROBLEM RESOLUTION:
*
* An S067-04 abend should no longer occur upon GDDRMAIN
* startup if another GDDR instance was not shut down cleanly.
*
* In addition, the GDDRMAIN ESTAE routine has been improved to
* ensure that GDDRMAIN is shut down cleanly in case of an
* abend.
*
* MODULES: GDDRMAIN
* GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3499
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: New PRIMARY command to display primary
* C-system name
*
* DESCRIPTION DETAIL:
*
* A new command is needed to display the primary C-system name
* from any system in the GDDR-plex, including managed systems.
*
* PROBLEM RESOLUTION:
*
* A new PRIMARY command has been created to display the
* primary C-system name from the point-of-view of one or more
* C-systems. By default, the point-of-view from all C-systems
* is shown. The SYSTEM parameter may be used to narrow the
* scope to the specified C-system, and the SITE parameter may
* be used to narrow the scope to the C-system at the specified
* site. This command may be issued from any system where
* GDDRMAIN is active, including managed systems. It can be
* issued as a GDDRMAIN modify command (e.g., F GDDRMAIN,PRI),
* as a Perform Health Check panel primary command (e.g., PRI),
* or using the GDDRMCMD batch interface (see GDDRMCMD in
* SAMPLIB).
*
* Syntax:
*
* PRImary
* [,SITE={DC1|DC2|DC3|DC4}]
* [,SYStem={<system_name>|LoCaL|ALL}]
* [,TiMeOut=<seconds>]
* [,CONsole[={Yes|No}]]
* [,SysMSG[={Yes|No}]]
* [,SysPRinT[={Yes|No}]]
* [,DeBuG[={Yes|No}]]
*
* Example:
*
* GDDUC04I Primary C-system as seen from the indicated
* site/system
* ---------------------------------------------------------
* Site System Value
* ---- -------- -----------------------------------------
* DC1 N247 N247
* DC2 X99 N247
* DC3 X98 N247
* ---------------------------------------------------------
*
* MODULES: GDDRMCMD
* GDDRMCON
*
* ------------------------------------------------------------
++PTF(GD60005) REWORK(2023012) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3463 GDDR-3465
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS0E0-29 upon GDDRMAIN startup or
* ABENDS0E0-28 upon GDDRMAIN shutdown
*
* DESCRIPTION DETAIL:
*
* An S0E0-29 abend could occur upon GDDRMAIN startup in the
* HBM (heartbeat monitor) subtask at GDDREVMI offset 0005AF74
* (data at PSW 183158F0 0010D507 3000F154). This causes the
* HBM subtask to terminate and leaves GDDRMAIN without
* heartbeat monitoring capabilities.
*
* In addition, an S0E0-28 abend could occur in GDDRRPT upon
* GDDRMAIN shutdown at GDDRMAIN offset 0006EAB2 (data at PSW
* D24FD37A 1000D207 D37D5004).
*
* PROBLEM RESOLUTION:
*
* An S0E0 abend should no longer occur upon GDDRMAIN startup
* in GDDREVMI or upon GDDRMAIN shutdown in GDDRRPT.
*
* MODULES: GDDREVMI
* GDDRRPT
Affected Products
Geographically Dispersed Disaster Restart (GDDR)Article Properties
Article Number: 000203766
Article Type: Solution
Last Modified: 07 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.