GDDR: z/OS 2.5 e yükseltme Olağan dışı durdurmaların ve GDDR Denetim SİSTEMLERİNİN İndirgenmiş Modda Çalışmasına Neden Olur
Summary: z/OS 2.5 e yükseltme, Coğrafi Olarak Dağınık Olağanüstü Durumdan Yeniden Başlatma'da (GDDR) ve GDDR Denetim SİSTEMLERİ'nde (C-SYS) Azaltılmış Mod'da sona ermeye neden oluyor.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Ana bilgisayar işletim yazılımı, bakım toleransı ile z/OS 2.5 yazılım düzeyine güncellenir. z/OS 2.5, yeni bir IBM z16 CPU için kullanılır.
GDDR GDDRMAIN, z/OS bakımı uygulandıktan sonra birkaç ABEND ile başlatıldı:
- HBM, GDDRMAIN başlatılırken aşağıdaki hatayı bildirir; GDDR ana bilgisayarı düşük moddadır:
ABEND S0E0-29
- GDDRRPT, GDDRMAIN kapatılmasında aşağıdaki hatayı bildirir:
ABEND S0E0-28
GDDR Olay İzleyicisi (EVM) ve Sinyal İzleyicisi (HBM) çıktısında aşağıdaki hata mesajı yayınlanır:
GDDUG86E No matching GDDR systems found
Eğer ABEND S0E0-28 GDDRMAIN kapatılmasında meydana gelir, ardından bir Abend S067-04 GDDRMAIN tekrar gündeme getirilirse ortaya çıkabilir.
Cause
Bir
Ek olarak, bir
ABEND S0E0-29 GDDREVMI modülündeki HBM alt görevinde GDDRMAIN başlatıldığında meydana gelebilir, ofset 0005AF74.
PSW 183158F0 0010D507 3000F154Bu, HBM alt görevinin sonlandırılmasına neden olur ve GDDRMAIN'i kalp atışı izleme özellikleri olmadan bırakır. GDDR ana bilgisayarı indirgenmiş modda çalışır. GDDREVMI, bir
ABEND S0E0-29'dir.
Ek olarak, bir
ABEND S0E0-28 GDDRMAIN'de GDDRMAIN'in kapatılması üzerine GDDRRPT'de meydana gelebilir, 0006EAB2 ofseti.
PSW D24FD37A 1000D207 D37D5004GDDRRPT, bir
ABEND S0E0-28. GDDRMAIN, veri alanı 2 Erişim Listesi Giriş Belirtecinin (ALET) geçerli olduğunu doğrulamak için güncellendi. Bu eylem, başka bir GDDR örneğinin veri alanına erişmeden önce yapılır. Bu eylem, bir Abend S067-04 başka bir GDDR örneğinin temiz bir şekilde kapanmaması nedeniyle GDDRMAIN başlatmasında.Resolution
Geçici Çözüm:
- ABEND S0E0-29 için yok ancak GDDR ana bilgisayarları indirgenmiş modda çalışmaya devam ediyor.
- Aşağıdaki durumlarda belleği temizlemek için Mantıksal Bölümün (LPAR) İlk Program Yükü (IPL) gereklidir:
Abend S067-04Oluşur.
Kalıcı Çözüm:
- GDDR 6.0 için Program Temporary Fix (PTF) GD60004 ve GD60005, Dell Destek'ten indirilebilir.
- GDDR 6.1 için sorun temel üründe çözülmüştür. Dell Desteği'nden indirilebilir.
Additional Information
Program Geçici Düzeltme (PTF) Açıklaması -
++PTF(GD60004) REWORK(2022315) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3459
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: Warning message GDDUG24W results in
* RC 8 on pre-script and post-script
* configuration displays
*
* DESCRIPTION DETAIL:
*
* During GDDR scripts, warning message GDDUG24W could result
* in an RC 8 on the pre-script and post-script configuration
* displays, for example:
*
* GDDUG24W 2 external RDF groups indicate SRDF/A active
* GDDR639I GDDR Completed pre-script configuration display
* with rc 8
*
* This is simply a messaging issue, as a non-zero RC on the
* configuration displays does not affect the outcome of the
* script.
*
* PROBLEM RESOLUTION:
*
* Warning message GDDUG24W will now result in an RC 4 on the
* configuration displays, as expected.
*
* MODULES: GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3460 GDDR-3472
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS067-04 upon GDDRMAIN startup due
* to another GDDR instance not shutting
* down cleanly
*
* DESCRIPTION DETAIL:
*
* An S067-04 abend could occur upon GDDRMAIN startup at
* GDDRMAIN offset 000006AC (data at PSW 4038B219 02009540
* 50E8B219) if another GDDR instance was not shut down
* cleanly. This causes GDDRMAIN to terminate.
*
* PROBLEM RESOLUTION:
*
* An S067-04 abend should no longer occur upon GDDRMAIN
* startup if another GDDR instance was not shut down cleanly.
*
* In addition, the GDDRMAIN ESTAE routine has been improved to
* ensure that GDDRMAIN is shut down cleanly in case of an
* abend.
*
* MODULES: GDDRMAIN
* GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3499
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: New PRIMARY command to display primary
* C-system name
*
* DESCRIPTION DETAIL:
*
* A new command is needed to display the primary C-system name
* from any system in the GDDR-plex, including managed systems.
*
* PROBLEM RESOLUTION:
*
* A new PRIMARY command has been created to display the
* primary C-system name from the point-of-view of one or more
* C-systems. By default, the point-of-view from all C-systems
* is shown. The SYSTEM parameter may be used to narrow the
* scope to the specified C-system, and the SITE parameter may
* be used to narrow the scope to the C-system at the specified
* site. This command may be issued from any system where
* GDDRMAIN is active, including managed systems. It can be
* issued as a GDDRMAIN modify command (e.g., F GDDRMAIN,PRI),
* as a Perform Health Check panel primary command (e.g., PRI),
* or using the GDDRMCMD batch interface (see GDDRMCMD in
* SAMPLIB).
*
* Syntax:
*
* PRImary
* [,SITE={DC1|DC2|DC3|DC4}]
* [,SYStem={<system_name>|LoCaL|ALL}]
* [,TiMeOut=<seconds>]
* [,CONsole[={Yes|No}]]
* [,SysMSG[={Yes|No}]]
* [,SysPRinT[={Yes|No}]]
* [,DeBuG[={Yes|No}]]
*
* Example:
*
* GDDUC04I Primary C-system as seen from the indicated
* site/system
* ---------------------------------------------------------
* Site System Value
* ---- -------- -----------------------------------------
* DC1 N247 N247
* DC2 X99 N247
* DC3 X98 N247
* ---------------------------------------------------------
*
* MODULES: GDDRMCMD
* GDDRMCON
*
* ------------------------------------------------------------
++PTF(GD60005) REWORK(2023012) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3463 GDDR-3465
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS0E0-29 upon GDDRMAIN startup or
* ABENDS0E0-28 upon GDDRMAIN shutdown
*
* DESCRIPTION DETAIL:
*
* An S0E0-29 abend could occur upon GDDRMAIN startup in the
* HBM (heartbeat monitor) subtask at GDDREVMI offset 0005AF74
* (data at PSW 183158F0 0010D507 3000F154). This causes the
* HBM subtask to terminate and leaves GDDRMAIN without
* heartbeat monitoring capabilities.
*
* In addition, an S0E0-28 abend could occur in GDDRRPT upon
* GDDRMAIN shutdown at GDDRMAIN offset 0006EAB2 (data at PSW
* D24FD37A 1000D207 D37D5004).
*
* PROBLEM RESOLUTION:
*
* An S0E0 abend should no longer occur upon GDDRMAIN startup
* in GDDREVMI or upon GDDRMAIN shutdown in GDDRRPT.
*
* MODULES: GDDREVMI
* GDDRRPT
Affected Products
Geographically Dispersed Disaster Restart (GDDR)Article Properties
Article Number: 000203766
Article Type: Solution
Last Modified: 07 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.