Geografisk spredt genstart efter nedbrud: GDDR genkender ikke en nonzero-returkode, når der udstedes en SRDF-HC-kommando ved hjælp af den dynamiske DIMX API

Summary: GDDR genkender ikke en nonzero-returkode, når der udstedes en værtskomponentkommando ved hjælp af den dynamiske API FORTX.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Hvis en SRDF-værtskomponentkommando mislykkes under et GDDR-script, kan meddelelsen GDDR313I muligvis fejlagtigt indikere RC=0 (eksempel nedenfor), og scriptet kan fortsætte, som om kommandoen lykkedes.      
GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498

Cause

Dette er et softwareproblem.

Resolution

Løsning:
  • For GDDR 6.0 løser PTF-GD60021 problemet. Den er tilgængelig til download fra Dell Online Support.
  • For GDDR 5.3 løser PTF-GD53104 problemet. Den er tilgængelig til download fra Dell Online Support.
GDDRDAP4 opdateres til at finde den korrekte returkode, når der udstedes SRDF-værtskomponentkommandoer ved hjælp af den dynamiske API (FC19). Derudover forbedres meddelelsen GDDR313I for at undgå forvirring med hensyn til, hvilken returkode der vises.

Additional Information

PTF-dækselbemærkninger:
  • GDDR 6.0L
++PTF(GD60021) REWORK(2023160) .                              
++VER(Z038) FMID(GDDR600)                                     
      PRE(                                                    
          GD60014                                             
          )                                                   
   /*                                                         
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):                                     
* ------------------------------------------------------------
*                                                             
* PROBLEM FIXED: GDDR-3601                                    
* USERS AFFECTED: GDDR VMAX/PowerMax users                    
* PROBLEM DESCRIPTION: GDDR script may not recognize non-zero 
*                      return code from SRDF HC command       
*                                                             
* DESCRIPTION DETAIL:                                         
*                                                             
* If an SRDF Host Component command fails during a GDDR       
* script, message GDDR313I could incorrectly indicate RC=0    
* (example below) and the script could proceed as if the      
* command was successful.                                     
*                                                             
*   GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498        
*                                                             
* PROBLEM RESOLUTION:                                         
*                                                             
* If an SRDF Host Component command fails during a GDDR       
* script, the return code will now be displayed correctly in  
* the GDDR313I message, and the script will handle the failure
* as appropriate.                                             
*                                                             
* In addition, message GDDR313I has been enhanced to avoid any
* confusion as to what return code is displayed.  Instead of  
* always indicating 'EMCSRDFR RC=', the message will now      
* indicate 'EMCSRDFR RC=', 'EMCSRDF_RC=', 'EMCSRDF_CMD_RC=',  
* or 'IRXEXCOM RC=' so it is clear exactly which return code  
* is displayed.                                               
*                                                             
* MODULES: GDDRDAP4                                           
*          GDDRMTXT                                           
*                                                             
* ------------------------------------------------------------
  • GDDR 5.3
++PTF(GD53104) REWORK(2023088) .                                
++VER(Z038) FMID(GDDR530)                                       
      PRE(                                                      
          GD53096                                               
          )                                                     
   /*                                                           
*-------------------------------------------------------------  
* PROBLEM DESCRIPTION(S):                                       
* ------------------------------------------------------------  
*                                                               
* PROBLEM FIXED: GDDR-3602                                      
* USERS AFFECTED: GDDR VMAX/PowerMax users                      
* PROBLEM DESCRIPTION: GDDR script may not recognize non-zero   
*                      return code from SRDF HC command         
*                                                               
* DESCRIPTION DETAIL:                                           
*                                                               
* If an SRDF Host Component command fails during a GDDR         
* script, message GDDR313I could incorrectly indicate RC=0      
* (example below) and the script could proceed as if the        
* command was successful.                                       
*                                                               
*   GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498          
*                                                               
* PROBLEM RESOLUTION:                                           
*                                                               
* If an SRDF Host Component command fails during a GDDR         
* script, the return code will now be displayed correctly in    
* the GDDR313I message, and the script will handle the failure  
* as appropriate.                                               
*                                                               
* In addition, message GDDR313I has been enhanced to avoid any  
* confusion as to which return code is displayed.  Instead of   
* always indicating 'EMCSRDFR RC=', the message will now        
* indicate 'EMCSRDFR RC=', 'EMCSRDF_RC=', 'EMCSRDF_CMD_RC=',    
* or 'IRXEXCOM RC=' so it is clear exactly which return code    
* is displayed.                                                 
*                                                               
* MODULES: GDDRDAP4                                             
*          GDDRMTXT                                             
*                                                               
* ------------------------------------------------------------  
* GD53104 29 Mar 2023 14:49:11                                  
* ------------------------------------------------------------  
*  OPT Summary                                                  
*  The following OPT was addressed by this PTF:                 
*                                                               
*    GDDR-3602                                                  
*                                                               
*-------------------------------------------------------------

Affected Products

Geographically Dispersed Disaster Restart (GDDR)
Article Properties
Article Number: 000215551
Article Type: Solution
Last Modified: 29 Jul 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.