Reinicio de desastre geográficamente disperso: GDDR no reconoce un código de retorno distinto de cero cuando emite un comando SRDF-HC mediante la API REXX dinámica

Summary: GDDR no reconoce un código de retorno distinto de cero cuando emite un comando de componente de host mediante la API REXX dinámica.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Si un comando de componente de host de SRDF falla durante un script de GDDR, el mensaje GDDR313I puede indicar incorrectamente RC=0 (ejemplo a continuación) y el script podría continuar como si el comando se ejecutara correctamente.      
GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498

Cause

Este es un problema de software.

Resolution

Solución: GDDRDAP4 se actualiza para buscar el código de retorno correcto cuando se emiten comandos de componentes de host de SRDF mediante la API REXX dinámica (FC19). Además, se mejoró la GDDR313I de mensajes para evitar cualquier confusión en cuanto al código de retorno que se muestra.

Additional Information

Notas de la cubierta de PTF:
  • GDDR 6.0L
++PTF(GD60021) REWORK(2023160) .                              
++VER(Z038) FMID(GDDR600)                                     
      PRE(                                                    
          GD60014                                             
          )                                                   
   /*                                                         
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):                                     
* ------------------------------------------------------------
*                                                             
* PROBLEM FIXED: GDDR-3601                                    
* USERS AFFECTED: GDDR VMAX/PowerMax users                    
* PROBLEM DESCRIPTION: GDDR script may not recognize non-zero 
*                      return code from SRDF HC command       
*                                                             
* DESCRIPTION DETAIL:                                         
*                                                             
* If an SRDF Host Component command fails during a GDDR       
* script, message GDDR313I could incorrectly indicate RC=0    
* (example below) and the script could proceed as if the      
* command was successful.                                     
*                                                             
*   GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498        
*                                                             
* PROBLEM RESOLUTION:                                         
*                                                             
* If an SRDF Host Component command fails during a GDDR       
* script, the return code will now be displayed correctly in  
* the GDDR313I message, and the script will handle the failure
* as appropriate.                                             
*                                                             
* In addition, message GDDR313I has been enhanced to avoid any
* confusion as to what return code is displayed.  Instead of  
* always indicating 'EMCSRDFR RC=', the message will now      
* indicate 'EMCSRDFR RC=', 'EMCSRDF_RC=', 'EMCSRDF_CMD_RC=',  
* or 'IRXEXCOM RC=' so it is clear exactly which return code  
* is displayed.                                               
*                                                             
* MODULES: GDDRDAP4                                           
*          GDDRMTXT                                           
*                                                             
* ------------------------------------------------------------
  • GDDR 5.3
++PTF(GD53104) REWORK(2023088) .                                
++VER(Z038) FMID(GDDR530)                                       
      PRE(                                                      
          GD53096                                               
          )                                                     
   /*                                                           
*-------------------------------------------------------------  
* PROBLEM DESCRIPTION(S):                                       
* ------------------------------------------------------------  
*                                                               
* PROBLEM FIXED: GDDR-3602                                      
* USERS AFFECTED: GDDR VMAX/PowerMax users                      
* PROBLEM DESCRIPTION: GDDR script may not recognize non-zero   
*                      return code from SRDF HC command         
*                                                               
* DESCRIPTION DETAIL:                                           
*                                                               
* If an SRDF Host Component command fails during a GDDR         
* script, message GDDR313I could incorrectly indicate RC=0      
* (example below) and the script could proceed as if the        
* command was successful.                                       
*                                                               
*   GDDR313I (35) (DYN) EMCSRDFR RC=0 Seconds=0.366498          
*                                                               
* PROBLEM RESOLUTION:                                           
*                                                               
* If an SRDF Host Component command fails during a GDDR         
* script, the return code will now be displayed correctly in    
* the GDDR313I message, and the script will handle the failure  
* as appropriate.                                               
*                                                               
* In addition, message GDDR313I has been enhanced to avoid any  
* confusion as to which return code is displayed.  Instead of   
* always indicating 'EMCSRDFR RC=', the message will now        
* indicate 'EMCSRDFR RC=', 'EMCSRDF_RC=', 'EMCSRDF_CMD_RC=',    
* or 'IRXEXCOM RC=' so it is clear exactly which return code    
* is displayed.                                                 
*                                                               
* MODULES: GDDRDAP4                                             
*          GDDRMTXT                                             
*                                                               
* ------------------------------------------------------------  
* GD53104 29 Mar 2023 14:49:11                                  
* ------------------------------------------------------------  
*  OPT Summary                                                  
*  The following OPT was addressed by this PTF:                 
*                                                               
*    GDDR-3602                                                  
*                                                               
*-------------------------------------------------------------

Affected Products

Geographically Dispersed Disaster Restart (GDDR)
Article Properties
Article Number: 000215551
Article Type: Solution
Last Modified: 29 Jul 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.