Dell NativeEdge: Jak exportovat protokoly ze servisní konzole NativeEdge

Summary: Tento článek popisuje, jak exportovat protokoly z nástroje konzoly služby.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Po spuštění nástroje Servisní konzole vyberte rozhraní ve stejné síti Layer 2, jak je popsáno v LKB000216330.

View protokoly koncového zařízení v terminálu výběrem "VIEW DEVICE STATUS" [5] nebo shromážděné výběrem "EXPORT LOGS" [10] z hlavní nabídky.
  
Select option from the menu list below:
MENU
1. GET MANAGEMENT NETWORK INFO
2. SET MANAGEMENT NETWORK INFO
3. PING
4. TRACEROUTE
5. VIEW DEVICE STATUS
6. GET RENDEZVOUS SERVER
7. SET RENDEZVOUS SERVER
8. GET NTP SERVER
9. SET NTP SERVER
10. EXPORT LOGS
11. REBOOT
12. EXIT

Chcete-li exportovat protokoly pro podporu, vyberte možnost "EXPORT LOGS" [10]. tar.gz protokolu se uloží do stejného umístění, kde byla spuštěna servisní konzole.
  
The export logs operation is currently in progress. The time required to complete this operation may differ depending on the size of the log files. Please wait until the export logs operation is completed.

========================================================================================= EXPORT LOGS ================================================================
Completed Export Logs...
        File Name:~/NativeEdgeServiceConsole_3.0.0.2/1KFTKW1-datacollect-factory-os-20240820081759.tar.gz
========================================================================================================================================================================

Affected Products

NativeEdge

Products

NativeEdge Solutions
Article Properties
Article Number: 000227913
Article Type: How To
Last Modified: 20 Aug 2024
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.