Avamar管理者UIがData Domainのステータスを「Invalid SNMP trap host or trap post」というメッセージで応答しないと報告する
Summary: Avamar Administratorユーザー インターフェイス(UI)がData Domainのステータスをレポートし、「Invalid SNMP trap host or trap post」というメッセージで応答しません。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
これはあくまでもレポートの問題である。バックアップとメンテナンスは影響を受けません。
Avamar UIに次のエラーが1つ以上表示される場合があります。
Data DomainのAvamarモニタリング ステータスが、Avamar管理者UIで緑色から黄色に変わります。
Avamar UIに次のエラーが1つ以上表示される場合があります。
Invalid SNMP trap host or trap host.
Cause
Data Domain SNMPトラップ ホストの値が、Avamarの完全修飾ドメイン名(FQDN)ではなく、Avamarユーティリティ ノードの内部ホスト名に設定されています。
Resolution
以下の手順に従います。
- Avamar管理者UIにログインします。
- サーバータブ>サーバー管理タブをクリックします。
- 対象のData Domainを選択します(対象の Data Domain には、ユーザー名の左側に黄色のドットが表示されます)。
- アクションData>Domainシステムの編集を選択します。
- 表示ウィンドウで、[Re-add Trap Host]を選択します。
- OKをクリックしてData Domainを更新します。
- Data Domainにログインし、AvamarのFQDNがData Domainに追加されていることを確認します(以下の出力例を参照)。
snmp show config General Configuration --------------------- SNMP sysLocation: testlocation SNMP sysContact: admin@test@test.com SNMP v2c Configuration ---------------------- Community Access Hosts --------- --------- ----- avamartest read-only public read-only --------- --------- ----- Trap Host Port Community ----------------------------------- ---- --------- testavamar-internal 163 testavamar.test.com 163 ----------------------------------- ---- --------- SNMP v3 Configuration --------------------- User Access Authentication Protocol Privacy Protocol ---- ------ ----------------------- ---------------- ---- ------ ----------------------- ---------------- Trap Host Port User --------- ---- ---- --------- ---- ----
Affected Products
AvamarProducts
Avamar, Data DomainArticle Properties
Article Number: 000041708
Article Type: Solution
Last Modified: 15 May 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.