Data Domain: Como verificar o status da replicação

Summary: Este artigo mostra como visualizar o status da replicação em um sistema Data Domain (DD).

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

A replicação pode ser habilitada ou desabilitada executando o replication enable ou replication disable .

# replication enable | disable
 

Verificando o status da replicação

No prompt do sistema Data Domain (DD-CLI), digite replication status. Esse comando exibe o número do contexto, o caminho de destino, se o contexto está habilitado ou desabilitado, o status da conexão e a última vez que o contexto foi sincronizado. 
sysadmin@DD7200# replication status
CTX   Destination                                                      Enabled   Connection        Sync'ed-as-of-time   Tenant-Unit
---   --------------------------------------------------------------   -------   ---------------   ------------------   -----------
1     mtree://DD72.somewhere.emea/data/col1/test_oscar_02_Repl_1     yes       idle              (unknown)            -
2     mtree://dd69.somewhere.emea/data/col1/test_16may_repl2         yes       idle              Thu Jul  4 10:10     -
3     mtree://DD72.somewhere.emea/data/col1/cascade_2                yes       idle              (unknown)            -
4     mtree://DD72.somewhere.emea/data/col1/oscar-test-02            yes       idle              Thu Jul  4 10:10     -
5     mtree://dd69.somewhere.emea/data/col1/quyue_dest1              no        never connected   (unknown)            -
6     mtree://dd69.somewhere.emea/data/col1/RoosDR                   yes       idle              Thu Jul  4 10:10     -
7     mtree://DD69-2.somewhere.emea/data/col1/zztest                 yes       idle              Thu Jul  4 10:10     -
9     mtree://dd69.somewhere.emea/data/col1/TESTPOOL1_r              yes       idle              Thu Jul  4 10:10     -
10    mtree://DD33.somewhere.emea/data/col1/watarep_repl             yes       idle              (initializing)       -
---   --------------------------------------------------------------   -------   ---------------   ------------------   -----------

Para obter uma exibição mais detalhada de cada contexto, digite replication status all.

Para exibir um contexto individual, digite: replication status rctx://<context number>.
 

Para verificar as estatísticas detalhadas de um contexto específico, digite replication show detailed-stats rctx://<context number>. Este exemplo mostra a saída para o número de contexto 6:

sysadmin@DD7200# replication show detailed-stats rctx://6
CTX:                                        6
Destination:                                mtree://dd69.somewhere.emea/data/col1/RoosDR
Network bytes sent to destination:          11,120,752,512
Pre-compressed bytes written to source:     143,787,738,112
Pre-compressed bytes sent to destination:   12,174,315,871
Bytes after synthetic optimization:         12,174,315,871
Bytes after filtering by destination:       10,742,483,555
Bytes after low bandwidth optimization:     10,742,483,555
Bytes after local compression:              10,915,444,310
Pre-compressed bytes remaining:             0
Compression ratio:                          1.1
Sync'ed-as-of time:                         Thu Jul  4 10:10

 

Para verificar se os dados estão sendo replicados no momento atual, digite replication show performance rctx://<context number>. Este exemplo usa novamente o número de contexto 6:

sysadmin@DD7200# replication show performance rctx://6
07/04 10:18:26
       rctx://6
 Pre-comp    Network   Streams   Time Busy (%)  Time Waiting (%)
  (KB/s)     (KB/s)             Reading   Meta  Dest     Network
 ---------  ---------  -------  --------------  ----------------
         0          0        0        0      0        0        0
         0          0        0        0      0        0        0
         0          0        0        0      0        0        0
         0          0        0        0      0        0        0
Ctrl + C to exit

 

Additional Information

 

 

 

 

     

    Affected Products

    Data Domain, Data Domain

    Products

    Data Domain
    Article Properties
    Article Number: 000043349
    Article Type: How To
    Last Modified: 04 Jul 2024
    Version:  3
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.