「Data Domain:レプリケーションの状態を確認する方法
Summary: この記事では、DD(Data Domain)システム上のレプリケーションのステータスを表示する方法について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
レプリケーションを有効または無効にするには、次のコマンドを実行します。 replication enable または replication disable に指定します。
# replication enable | disable
レプリケーション ステータスの確認
Data Domainシステム プロンプト(DD-CLI)で、次のように入力します。replication statusの詳細を確認してください。このコマンドは、コンテキスト番号、宛先パス、コンテキストが有効か無効か、接続ステータス、コンテキストが最後に同期された時刻を表示します。
sysadmin@DD7200# replication status
CTX Destination Enabled Connection Sync'ed-as-of-time Tenant-Unit
--- -------------------------------------------------------------- ------- --------------- ------------------ -----------
1 mtree://DD72.somewhere.emea/data/col1/test_oscar_02_Repl_1 yes idle (unknown) -
2 mtree://dd69.somewhere.emea/data/col1/test_16may_repl2 yes idle Thu Jul 4 10:10 -
3 mtree://DD72.somewhere.emea/data/col1/cascade_2 yes idle (unknown) -
4 mtree://DD72.somewhere.emea/data/col1/oscar-test-02 yes idle Thu Jul 4 10:10 -
5 mtree://dd69.somewhere.emea/data/col1/quyue_dest1 no never connected (unknown) -
6 mtree://dd69.somewhere.emea/data/col1/RoosDR yes idle Thu Jul 4 10:10 -
7 mtree://DD69-2.somewhere.emea/data/col1/zztest yes idle Thu Jul 4 10:10 -
9 mtree://dd69.somewhere.emea/data/col1/TESTPOOL1_r yes idle Thu Jul 4 10:10 -
10 mtree://DD33.somewhere.emea/data/col1/watarep_repl yes idle (initializing) -
--- -------------------------------------------------------------- ------- --------------- ------------------ -----------
各コンテキストの詳細を表示するには、次のように入力します。
replication status allの詳細を確認してください。
個々のコンテキストタイプを表示するには replication status rctx://<context number>の詳細を確認してください。
特定のコンテキストの詳細な統計情報を確認するには、次のように入力します。 replication show detailed-stats rctx://<context number>の詳細を確認してください。次に、コンテキスト番号 6 の出力例を示します。
sysadmin@DD7200# replication show detailed-stats rctx://6
CTX: 6
Destination: mtree://dd69.somewhere.emea/data/col1/RoosDR
Network bytes sent to destination: 11,120,752,512
Pre-compressed bytes written to source: 143,787,738,112
Pre-compressed bytes sent to destination: 12,174,315,871
Bytes after synthetic optimization: 12,174,315,871
Bytes after filtering by destination: 10,742,483,555
Bytes after low bandwidth optimization: 10,742,483,555
Bytes after local compression: 10,915,444,310
Pre-compressed bytes remaining: 0
Compression ratio: 1.1
Sync'ed-as-of time: Thu Jul 4 10:10
現在の時刻にデータがレプリケートされているかどうかを確認するには、次を入力します。 replication show performance rctx://<context number>の詳細を確認してください。この例では、コンテキスト番号 6 を再び使用します。
sysadmin@DD7200# replication show performance rctx://6
07/04 10:18:26
rctx://6
Pre-comp Network Streams Time Busy (%) Time Waiting (%)
(KB/s) (KB/s) Reading Meta Dest Network
--------- --------- ------- -------------- ----------------
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
Ctrl + C to exit
Additional Information
Affected Products
Data Domain, Data DomainProducts
Data DomainArticle Properties
Article Number: 000043349
Article Type: How To
Last Modified: 04 Jul 2024
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.