NetWorker:被动节点中的群集灾难恢复备份失败
Summary: 被动节点中的群集灾难恢复备份失败
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
灾难恢复存储集的文件系统备份失败,但适用于双节点群集中的本地驱动器。
环境:
安装了 NetWorker 19.x 客户端软件包的 Windows Server 2019 客户端
群集Cluster_Name存储集详细信息>共享驱动器 Q: 和 CSV (C:\ClusterStorage\Volume1)。
>
ClusterNode-1
存储集详细信息 > C:\ 和 DR
群集节点-2
存储集详细信息 > C:\ 和 DR
Cause
Error:
99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.
这意味着某些应用程序安装在 CSV 上,因此它将 CSV 视为关键驱动器。
save -o VSS:LCV=yes 不应将 CSV 列为物理节点上的关键卷。如果 CSV 列为严重,则 DR 备份将失败。在下面的输出(检查“注释”部分)中,可以看到 CSV 在一个节点上列为关键,而在另一个节点上则不是。
提醒:NetWorker 支持 CSV 备份,但存在以下限制:
- 卷不能是关键卷。
- NetWorker 无法对位于同一卷影拷贝集中的 CSV 和本地磁盘进行卷影拷贝。
Resolution
从 CSV 中删除已安装的应用程序。
Additional Information
输出来自群集中的一个节点。这会将 CSV 显示为关键卷,因此备份适用于 C:\,而对于来自此节点的灾难恢复存储集则失败。
C:\Windows\system32>save -o VSS:LCV=yes 181407:save: Step (1 of 5) for PID-7600: Save has been started on the client 'clu_node1'. 175312:save: Identified a save for the manual backup with PID-7600 on the client 'clu_node1'. Updating the total number of steps from 5 to 7. 175313:save: Step (2 of 7) for PID-7600: Running the backup on the client 'clu_node1' for the selected save sets. 3817:save: Using YYYYY as server 99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported. The following volumes are determined as critical by the system state writers: C:\ (disk num 0) The following volumes are critical because they are parents for one or more mounted critical volumes: The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes: The output is from another node from Cluster which doesn't show CSV as critical volume and hence backup works for both C:\ and DR saveset. C:\Windows\system32>save -o VSS:LCV=yes 181407:save: Step (1 of 5) for PID-8172: Save has been started on the client 'cluster_node2'. 175312:save: Identified a save for the manual backup with PID-8172 on the client 'cluster_node2'. Updating the total number of steps from 5 to 7. 175313:save: Step (2 of 7) for PID-8172: Running the backup on the client 'cluster_node2' for the selected save sets. 3817:save: Using YYYYY as server The following volumes are determined as critical by the system state writers: C:\ (disk num 0) The following volumes are critical because they are parents for one or more mounted critical volumes: The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:
Affected Products
NetWorkerProducts
NetWorkerArticle Properties
Article Number: 000058605
Article Type: Solution
Last Modified: 12 Dec 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.