NetWorker:被動節點中的叢集災難回復備份失敗

Summary: 被動節點中的叢集災難回復備份失敗

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

災難回復儲存集的檔案系統備份失敗,但適用於雙節點叢集中的本機磁碟機。

環境:
已安裝 NetWorker 19.x 用戶端套件的 Windows Server 2019

叢集 > Cluster_Name
儲存集詳細資訊 > 共用磁碟機 Q: 和 CSV (C:\ClusterStorage\Volume1)。

叢集節點-1
儲存集詳細資料 > C:\ 和 DR

叢集節點-2
儲存集詳細資料 > C:\ 和 DR

 

Cause

Error:

99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.

這表示某些應用程式安裝在 CSV 上,因此會將 CSV 視為關鍵磁碟機。

save -o VSS:LCV=yes 不應將 CSV 列為實體節點上的關鍵磁碟區。如果 CSV 列為嚴重,則 DR 備份會失敗。在以下輸出結果 (檢查備註區段) 中,可以看到 CSV 在一個節點上列為嚴重,而在另一個節點上則不是。

注意:NetWorker 支援 CSV 備份,但有以下限制:
  • 磁碟區不能是關鍵磁碟區。
  • NetWorker 無法捲影複製位於相同卷影副本集中的 CSV 和本地磁碟。

 

Resolution

從 CSV 中移除已安裝的應用程式。

 

Additional Information

輸出來自叢集中的其中一個節點。這會顯示 CSV 為嚴重磁碟區,因此備份可針對 C:\ 運作,而從此節點備份 DR 儲存集則會失敗。

C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-7600: Save has been started on the client 'clu_node1'.
175312:save: Identified a save for the manual backup with PID-7600 on the client 'clu_node1'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-7600: Running the backup on the client 'clu_node1' for the selected save sets.
3817:save: Using YYYYY as server
99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:
The output is from another node from Cluster which doesn't show CSV as critical volume and hence backup works for both C:\ and DR saveset.
C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-8172: Save has been started on the client 'cluster_node2'.
175312:save: Identified a save for the manual backup with PID-8172 on the client 'cluster_node2'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-8172: Running the backup on the client 'cluster_node2' for the selected save sets.
3817:save: Using YYYYY as server
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:

 

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000058605
Article Type: Solution
Last Modified: 12 Dec 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.