NetWorker: 패시브 노드에서 클러스터 재해 복구 백업 실패

Summary: 패시브 노드에서 클러스터 재해 복구 백업 실패

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

재해 복구 세이브 세트에 대한 파일 시스템 백업은 실패하지만 2노드 클러스터의 로컬 드라이브에 대해서는 작동합니다.

환경:
NetWorker 19.x 클라이언트 패키지가 설치된 Windows Server 2019 Client

클러스터 > Cluster_Name
세이브 세트 세부 정보 > 공유 드라이브 Q: 및 CSV(C:\ClusterStorage\Volume1)

ClusterNode-1
세이브 세트 세부 정보 > C:\ 및 DR

ClusterNode-2
세이브 세트 세부 정보 > C:\ 및 DR

 

Cause

오류:

99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.

즉, 일부 애플리케이션이 CSV에 설치되어 있으므로 CSV를 중요한 드라이브로 간주합니다.

save -o VSS:LCV=yes 가 물리적 노드의 중요 볼륨으로 CSV를 나열하지 않아야 합니다. CSV가 중요한 것으로 나열된 경우 DR 백업이 실패합니다. 아래 출력(참고 섹션 참조)에서 CSV가 한 노드에서는 중요로 나열되고 다른 노드에서는 그렇지 않음을 확인할 수 있습니다.

참고: NetWorker는 CSV 백업을 지원하되 다음과 같은 제한 사항이 있습니다.
  • 중요 볼륨이어서는 안 됩니다.
  • 섀도우 복제본 CSV와 로컬 디스크가 동일한 볼륨 섀도우 복제본 세트에 있을 수 없습니다.

 

Resolution

CSV에서 설치된 애플리케이션을 제거합니다.

 

Additional Information

클러스터의 노드 중 하나로부터 출력됩니다. 이렇게 하면 CSV가 중요 볼륨으로 표시되므로 C:\에 대해서는 백업이 작동하지만 이 노드의 DR 세이브 세트에 대해서는 백업이 실패합니다.

C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-7600: Save has been started on the client 'clu_node1'.
175312:save: Identified a save for the manual backup with PID-7600 on the client 'clu_node1'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-7600: Running the backup on the client 'clu_node1' for the selected save sets.
3817:save: Using YYYYY as server
99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:
The output is from another node from Cluster which doesn't show CSV as critical volume and hence backup works for both C:\ and DR saveset.
C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-8172: Save has been started on the client 'cluster_node2'.
175312:save: Identified a save for the manual backup with PID-8172 on the client 'cluster_node2'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-8172: Running the backup on the client 'cluster_node2' for the selected save sets.
3817:save: Using YYYYY as server
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:

 

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000058605
Article Type: Solution
Last Modified: 12 Dec 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.