NetWorker: Back-up van Cluster Disaster Recovery mislukt in passief knooppunt

Summary: Back-up van Cluster Disaster Recovery mislukt in passief knooppunt

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Back-up van het bestandssysteem mislukt voor Disaster Recovery saveset, maar werkt voor lokale schijven in een cluster met twee knooppunten.

Omgeving:
Windows Server 2019-client met NetWorker 19.x clientpakket geïnstalleerd

Cluster > Cluster_Name
Saveset details > gedeelde schijf V: en CSV (C:\ClusterStorage\Volume1).

ClusterNode-1
Saveset details > C:\ en DR

ClusterNode-2
Saveset details > C:\ en DR

 

Cause

Fout:

99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.

Dit betekent dat een bepaalde applicatie op CSV is geïnstalleerd, vandaar dat CSV als een kritieke schijf wordt beschouwd.

save -o VSS:LCV=yes mag CSV niet als kritiek volume op de fysieke knooppunten vermelden. Als CSV als kritiek wordt vermeld, mislukt de noodherstelback-up. Zie in de onderstaande uitvoer (controleer het gedeelte Opmerkingen) dat CSV op het ene knooppunt als kritiek wordt vermeld en bij een ander knooppunt niet.

Opmerking: NetWorker ondersteunt CSV-back-ups met de volgende beperkingen:
  • Het volume kan geen kritiek volume zijn.
  • NetWorker kan geen CSV-bestand en lokale schijven schaduwkopiëren die zich in dezelfde volumeschaduwkopieset bevinden.

 

Resolution

Verwijder de geïnstalleerde applicatie uit CSV.

 

Additional Information

De uitvoer is afkomstig van een van de knooppunten in het cluster. Hierbij wordt CSV weergegeven als kritiek volume en daarom werkt de back-up voor C:\ en mislukt voor DR-saveset van dit knooppunt.

C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-7600: Save has been started on the client 'clu_node1'.
175312:save: Identified a save for the manual backup with PID-7600 on the client 'clu_node1'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-7600: Running the backup on the client 'clu_node1' for the selected save sets.
3817:save: Using YYYYY as server
99128:save:Disaster Recovery: critical volume C:\ClusterStorage\Volume1\ identified for disaster recovery backup has been created on a CSV volume. Backup of critical volume on CSV volume is not supported.
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:
The output is from another node from Cluster which doesn't show CSV as critical volume and hence backup works for both C:\ and DR saveset.
C:\Windows\system32>save -o VSS:LCV=yes
181407:save: Step (1 of 5) for PID-8172: Save has been started on the client 'cluster_node2'.
175312:save: Identified a save for the manual backup with PID-8172 on the client 'cluster_node2'. Updating the total number of steps from 5 to 7.
175313:save: Step (2 of 7) for PID-8172: Running the backup on the client 'cluster_node2' for the selected save sets.
3817:save: Using YYYYY as server
The following volumes are determined as critical by the system state writers:
C:\ (disk num 0)
The following volumes are critical because they are parents for one or more mounted critical volumes:
The following volumes are critical because they are in the same dynamic disk pack with one or more critical volumes:

 

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000058605
Article Type: Solution
Last Modified: 12 Dec 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.