PowerFlex: Der Wartungsmodus kann nicht beendet werden
Summary: PowerFlex steckt in EXIT_MAINTENANCE_IN_PROGRESS fest.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Es sind zwei Festplatten auf separaten SDS gleichzeitig verloren gegangen, was zu Datenfehlern geführt hat. Mehrere Versuche, den Wartungsmodus zu beenden, schlagen fehl.
server@node-2-2 ~ $ scli --clear_sds_device_error --sds_ip 1X.2X.1X.1 --device_id 2c2zz93a01f30000 --clear_all Successfully cleared all SDS with IP 1X.2X.1X.1 (port 7072) devices server@node-2-2 ~ $ scli --query_all_sds | grep 1X.1X.1X.1 SDS ID: ce87bbdc000001cd Name: sds1X.1X.1X.1 State: Connected, Joined IP: 1X.1X.1X.1 Port: 7072 EXIT_MAINTENANCE_IN_PROGRESS Version: 2.0.5014 server@node-2-2 ~ $ scli --exit_maintenance_mode --sds_ip 1X.1X.1X.1 --protection_domain_name PD3 --force_failed_device_id 2c2zz92401cb0000 Exit Maintenance Mode Results: SDS sds1X.9.1X.1: The specified SDS is in a process of exiting maintenance-mode. server@node-2-2 ~ $ scli --exit_maintenance_mode --sds_ip 1X.1X.1X.1 --protection_domain_name PD3 --force_failed_sds Exit Maintenance Mode Results: SDS sds10.11.10.1: The specified SDS is in a process of exiting maintenance-mode. Error: MDM failed command. Status: The specified SDS is in a process of exiting maintenance-mode.
Wenn Sie sich die scli --query_all, Ihr seht, wir sind es.
SDS Summary:
Total 276 SDS Nodes
276 SDS nodes have membership state 'Joined'
276 SDS nodes have connection state 'Connected'
1 SDS nodes have maintenance state 'Exiting-Maintenance-Mode'
469.6 TB (480836 GB) total capacity
357.5 TB (366093 GB) unused capacity
0 Bytes snapshots capacity
45.1 TB (46192 GB) in-use capacity
0 Bytes thin capacity
45.1 TB (46168 GB) protected capacity
24.0 GB (24571 MB) failed capacity
0 Bytes degraded-failed capacity
0 Bytes degraded-healthy capacity
3.5 TB (3556 GB) unreachable-unused capacity
Cause
Das System lässt das Beenden des Wartungsmodus nicht zu, wenn die Kapazität zum Schutz der Daten ausgefallen ist.
Resolution
NutzerInnen müssen sich um die ausgefallene Kapazität kümmern, ausgefallene HW ersetzen und einen erneuten Aufbau zulassen
Affected Products
PowerFlex rack, ScaleIOArticle Properties
Article Number: 000171816
Article Type: Solution
Last Modified: 26 Nov 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.