PowerEdge:以前のESXiバージョンからESXi 7.0へのアップグレードが「vmkapi DependencyError」で失敗する
Summary: Dell PowerEdgeサーバーをVMware ESXi 6.7または6.5からVMware ESXi 7.0にアップグレードすると、vmkapi DependancyErrorで失敗することがあります。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Dell PowerEdgeサーバーをVMware ESXi 6.7または6.5からVMware ESXi 7.0にアップグレードすると、次のエラーで失敗することがあります。 vmkapi DependancyError 古いもので構築されたドライバーが原因です vmkapi ESXi 7.0で廃止されたバージョンの依存関係。
対象製品:
- Dell PowerEdgeサーバーのVMware ESXi 6.7または6.5からVMware ESXi 7.0へのアップグレード
VMwareアップグレードのエラー例:
VIBの QLC_bootbank_qedi_2.10.15.0-1OEM.670.0.0.8169922 必要 vmkapi_2_2_0_0, ただし、要件は ImageProfile
[DependencyError] ... VIB QLC_bootbank_qedi_2.10.15.0-1OEM.670.0.0.8169922 requires vmkapi_2_2_0_0, but the requirement cannot be satisfied within the ImageProfile. ... VIB QLC_bootbank_qedf_1.3.35.0-1OEM.600.0.0.2768847 requires vmkapi_2_2_0_0, but the requirement cannot be satisfied within the ImageProfile. ... VIB QLC_bootbank_qedf_1.3.35.0-1OEM.600.0.0.2768847 requires vmkapi_2_3_0_0, but the requirement cannot be satisfied within the ImageProfile. ... VIB QLC_bootbank_qedf_1.3.35.0-1OEM.600.0.0.2768847 requires qedentv_ver = X.11.6.0, but the requirement cannot be satisfied within the ImageProfile. ... VIB QLC_bootbank_qedi_2.10.15.0-1OEM.670.0.0.8169922 requires qedentv_ver = X.11.6.0, but the requirement cannot be satisfied within the ImageProfile. ... VIB QLC_bootbank_qfle3f_1.0.68.0-1OEM.650.0.0.4598673 requires vmkapi_2_2_0_0, but the requirement cannot be satisfied within the ImageProfile. ... VIB SFC_bootbank_sfvmk_2.3.3.1002-1OEM.650.0.0.4598673 requires vmkapi_2_2_0_0, but the requirement cannot be satisfied within the ImageProfile.
Cause
この問題は、ドライバーが古いバージョンで構築されている場合に発生します vmkapi ESXi 7.0以降で廃止されたバージョンの依存関係。影響を受けるドライバーのリストについては、「ESXi 7.0 のインストールまたはアップグレード中に vmkapi 依存関係エラーが発生する (78389)」を参照してください。
Resolution
Dellは、DellがカスタマイズしたISOイメージのA00またはA01バージョンを使用したESXi 7.0へのアップグレードを推奨していません。アップグレードの問題が発生し、以前の6.xインストールに戻すことができない場合、またはESXi 7.0の新規インストールを実行できない場合は、Dellテクニカル サポートにお問い合わせください。
注:DellがカスタマイズしたA00/A01 ISO(ビルド15952498)は、ESXi 7.0の新規インストールに適しています。既知の問題については、『VMware vSphere 7.xリリース ノート』を参照してください。詳細については、『VMware vSphere 7.x on Dell PowerEdge Systems Release Notes』を参照してください。
アップグレードには、古いバージョンで発生した問題に対処している、DellがカスタマイズしたISOバージョンA02以降を使用してください。
Affected Products
VMware ESXi 6.5.X, VMware ESXi 6.7.X, VMware ESXi 7.xProducts
PowerEdge c6320, PowerEdge c6320p, PowerEdge C6420, Poweredge FC430, Poweredge FC630, PowerEdge FC640, Poweredge FC830, PowerEdge M630, PowerEdge M630 (for PE VRTX), PowerEdge M640, PowerEdge M640 (for PE VRTX), PowerEdge M830
, PowerEdge M830 (for PE VRTX), PowerEdge MX740C, PowerEdge MX840C, PowerEdge R230, PowerEdge R240, PowerEdge R250, PowerEdge R330, PowerEdge R340, PowerEdge R350, PowerEdge R430, PowerEdge R440, PowerEdge R450, PowerEdge R530, PowerEdge R530xd, PowerEdge R540, PowerEdge R550, PowerEdge R630, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R730, PowerEdge R730xd, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R830, PowerEdge R840, PowerEdge R930, PowerEdge R940, PowerEdge R940xa, PowerEdge T330, PowerEdge T340, PowerEdge T350, PowerEdge T360, PowerEdge T430, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T630, PowerEdge T640
...
Article Properties
Article Number: 000176849
Article Type: Solution
Last Modified: 23 Nov 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.