PowerFlex：SDS 裝置在移除作業後卡在「移除-擱置中」狀態

Summary: SDS 裝置在發出裝置移除命令後，長時間處於「移除-擱置」狀態。 移除一或多個 SDS 裝置後，可能會出現此問題。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

裝置會保留在系統中。 scli --query_sds 聲明它是 "Remove-pending"：

# scli --query_sds --sds_name SDSx
(...)
Device information (total 1 devices):
         1: Name: /dev/sdb  Path: /dev/sdb  Original-path: /dev/sdb  ID: 657b5b5e00000000
                Storage Pool: sp1, Capacity: 108 GB, State: Remove-pending
                Scanned 658 MB, Unresolved Read errors: 0/0, Unresolved Compare errors: 0/0

要從中移除裝置的儲存集區已停用重新平衡：

scli --query_all
(...)
Storage Pool sp1 (Id: f5293c1100000000) has 4 volumes and 88.4 GB (90560 MB) free net capacity. 928.0 GB (950272 MB) volume allocation limit.
        The number of parallel rebuild/rebalance jobs: 2
        Rebuild is enabled and using Limit-Concurrent-IO policy with the following parameters:
          Number of concurrent IOs per device: 1
=>        Rebalance is disabled. <=

Cause

儲存集區層級的重新平衡已停用。裝置移除作業實際上是一種重新平衡，因此如果停用，移除裝置將不會繼續進行。

 

Resolution

啟用儲存集區的重新平衡。

 

Affected Products

PowerFlex Software
Article Properties
Article Number: 000183050
Article Type: Solution
Last Modified: 26 Nov 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.