PowerFlex：SDS 设备在删除作后停滞在“Remove-pending”状态

Summary: 发出设备删除命令后，SDS 设备长时间处于“Remove-pending”状态。 删除一个或多个 SDS 设备后，可能会出现此问题。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

设备保留在系统中。 scli --query_sds 状态是 "Remove-pending"：

# scli --query_sds --sds_name SDSx
(...)
Device information (total 1 devices):
         1: Name: /dev/sdb  Path: /dev/sdb  Original-path: /dev/sdb  ID: 657b5b5e00000000
                Storage Pool: sp1, Capacity: 108 GB, State: Remove-pending
                Scanned 658 MB, Unresolved Read errors: 0/0, Unresolved Compare errors: 0/0

对于要从中删除设备的存储池，重新平衡已禁用：

scli --query_all
(...)
Storage Pool sp1 (Id: f5293c1100000000) has 4 volumes and 88.4 GB (90560 MB) free net capacity. 928.0 GB (950272 MB) volume allocation limit.
        The number of parallel rebuild/rebalance jobs: 2
        Rebuild is enabled and using Limit-Concurrent-IO policy with the following parameters:
          Number of concurrent IOs per device: 1
=>        Rebalance is disabled. <=

Cause

在存储池级别禁用重新平衡。设备删除作实际上是重新平衡，因此如果禁用该作，设备删除将不会继续进行。

 

Resolution

为存储池启用重新平衡。

 

Affected Products

PowerFlex Software
Article Properties
Article Number: 000183050
Article Type: Solution
Last Modified: 26 Nov 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.