PowerFlex: SDS-enheten sitter fast i "Remove-venter"-tilstand etter fjerningsoperasjon

Summary: SDS-enheter forblir i "Fjern-venter"-tilstand i lang tid etter at de har utstedt en kommando for fjerning av enheten. Dette problemet kan manifestere seg etter at du har fjernet en eller flere SDS-enheter. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Enheten forblir i systemet. scli --query_sds sier det er "Remove-pending":

# scli --query_sds --sds_name SDSx
(...)
Device information (total 1 devices):
         1: Name: /dev/sdb  Path: /dev/sdb  Original-path: /dev/sdb  ID: 657b5b5e00000000
                Storage Pool: sp1, Capacity: 108 GB, State: Remove-pending
                Scanned 658 MB, Unresolved Read errors: 0/0, Unresolved Compare errors: 0/0

Rebalansering er deaktivert for lagringsutvalget der vi fjerner enhetene fra:

scli --query_all
(...)
Storage Pool sp1 (Id: f5293c1100000000) has 4 volumes and 88.4 GB (90560 MB) free net capacity. 928.0 GB (950272 MB) volume allocation limit.
        The number of parallel rebuild/rebalance jobs: 2
        Rebuild is enabled and using Limit-Concurrent-IO policy with the following parameters:
          Number of concurrent IOs per device: 1
=>        Rebalance is disabled. <=

Cause

Rebalansering er deaktivert på lagringspuljenivå. Enhetsfjerningsoperasjonen er faktisk en rebalansering, så hvis den er deaktivert, vil ikke fjerningen av enheten fortsette.

 

Resolution

Aktiver rebalansering for lagringsgruppen.

 

Affected Products

PowerFlex Software
Article Properties
Article Number: 000183050
Article Type: Solution
Last Modified: 26 Nov 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.