PowerEdge: R7725 - Incorrect slot type is reported under PCIe slot7 in iDRAC10
Summary: An incorrect slot type s reported under PCIe slot 7, reported as "OCP3Small" in iDRAC10 UI.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
In iDRAC10 UI, the slot type of a PERC Adapter (PCIe Slot7) is incorrectly reported as "OCP3Small" under PCIe slots when a second OCP is installed.
The PERC Adapter (Part Number W3T2J) is a Half Length card.
Cause
This is a BIOS issue.
Resolution
This is a cosmetic issue with no functional impact.
The PERC adapter is functioning properly, and this issue is only observed on a R7725 when a PERC adapter (Part Number W3T2J) is installed in slot 7.
Dell Engineering is aware of this issue.
A fix is expected in a BIOS update around the target fix date of March 2025.
Affected Products
iDRAC10 - 1.10.xx Series, OEMR XL R7725, PowerEdge RAID Controller H965i Adapter, PowerEdge R7725Article Properties
Article Number: 000243237
Article Type: Solution
Last Modified: 03 Sep 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.