PowerStore:系统运行状况检查检测到过时的 SCSI3 保留问题

Summary: 此系统运行状况检查 (SHC) 用于检测 PowerStoreOS 版本 4.0.x 的系统是否存在过时的 SCSI3 保留问题。有关此问题的详细信息,请参阅 KB# 000234421。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

在以下情况之一中,系统运行状况可能会显示具有规模 SCSI3 保留 (KB#000234421) 的已找到卷消息:
 

  • 使用 PowerStore Manager (GUI) Run System Check选项运行系统检查
检测到过时的 SCSI3 保留
  • 使用 SSH 连接运行系统运行状况服务脚本 (svc_health_check):
[SVC:service@50T1BW2-A user]$ svc_health_check run -rhc stale_scsi3_reservation_check
Name                               Location  Status     Description
Stale SCSI3 reservation check      node_b    Failed     Found volumes with stale SCSI3 reservation.(KB#000234421)
 
 
SUMMARY Status: Failed
   Passed:      0
   Failed:      1
   Total:       1

   
提醒:结果可能因检查失败的节点而异。
 
有关此 SHC 检查检测到的 SCSI3 过时保留问题的更多详细信息,请参阅 PowerStore 000234421 KB#:无效的 SCSI-3 保留和注册可能会导致到 PowerStoreOS 4.0.0.x 的软件升级失败
 
运行状况检查是运行状况检查精简软件包中包含的脱版 SHC 检查。有关运行状况检查精简软件包的信息,请参阅本文的“其他信息”部分。

Cause

运行 PowerStoreOS 版本 3.6 或更低版本的设备可能具有 SCSI 注册无效或不匹配的 SCSI3 保留

在 NDU 到此类设备的版本 4.0.x 期间,如果owner_idx没有相应的 SCSI reg 对象,NDU 可能会失败。但是,如果重复使用owner_idx(即使它用于不同的卷),则到 4.0.x 的 NDU 将会成功。在这种情况下,当系统在版本 4.0.x 代码上运行时,无效或不匹配的 SCSI 注册可能会导致 System Manager (SYM) 滚动死机情况。

Resolution

要解决此问题,请联系技术支持 以获得帮助。请参阅 KB# 000234421以加快关注和解决问题的速度。

Additional Information

Affected Products

PowerStore
Article Properties
Article Number: 000259473
Article Type: Solution
Last Modified: 14 Jun 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.