PowerEdge: Intel NIC Family Version 24.0.0 Firmware for Intel adapters "Requires Power Cycle for activating the updated firmware" cosmetic alert.
Summary: Linux-based Dell Update Packages (DUPs) for Intel Network cards on firmware family 24.0.0 may display the message "Requires Power Cycle for activating the updated firmware".
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
During Linux firmware update using DUP, the message: “Requires Power Cycle for activating the updated firmware” appears before install.
Example below shows version 24.0.3 displaying this message
Version 24.0.5 below clarifies
Message will display "Reboot Required for activating the updated firmware" which is a warm OS reboot.
This is observed across legacy adapters using Linux OS for firmware updates. i.e E810, E823, I350, X550, X710, XXV710, XL710.
Does not affect Windows, iDRAC, or Lifecycle Controller DUP usage.
Cause
The DUP framework incorrectly flags a power cycle requirement due to changes introduced in recent framework versions. This is a cosmetic issue and does not impact functionality.
Resolution
No action required beyond a standard WARM reboot.
Ignore the “Power Cycle” message; it does not apply.
Issue is documented in the update file prompt and in firmware release notes {346725}.
Affected Products
Network Adapters, Intel PRO Family of AdaptersArticle Properties
Article Number: 000388255
Article Type: Solution
Last Modified: 20 Nov 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.