Connectrix MDS:SNMP 服務停止並顯示「Signal 6」類型

Summary: 簡單網路管理協定 (SNMP) 服務因「信號 6」類型而停止。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

環境:

  • 多層導向器交換器 (MDS) 9000 硬體與 IPStorage 介面
  • MDS 9250i
  • MDS 9220i
  • MDS 9700 搭配 1/10/40G IPS、2/4/8/10/16G FC 模組 DS-X9334-K9

Error message:

%SYSMGR-2-SERVICE_CRASHED: Service "snmpd" (PID 123) hasn't caught signal 6 (core will be saved).

Cause

Cisco 問題 CSCwq54982 此超連結會帶您前往 Dell Technologies 以外的網站。 記憶體洩漏 libport_mgr_common.so 

透過提供邏輯區塊介面到快閃記憶體裝置, snmpd 記憶體洩漏輪詢 IPStorage 介面收發器

Resolution

因應措施:
若要避免 signal 6 crash、 監控 SNMP 服務記憶體使用方式,並在 MemUsed 達到 MemLimit 的 90% 之前,以非中斷的方式重新載入交換器,以便進行光纖交換器和導控器級交換的系統切換:

show processes memory | include "PID|snmpd"

導控器開關: system switchover 
光纖交換器: reload system non-disruptive 

SNMP 服務會在系統停止後自動重新開機,且不會中斷。

定:
升級至 NX-OS 9.4.4

Affected Products

Connectrix MDS-9220i, Connectrix MDS-9250i, Connectrix MDS-Series Firmware 9.X
Article Properties
Article Number: 000390186
Article Type: Solution
Last Modified: 20 Nov 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.