Article Number: 540610

printer Print mail Email

Dell EMC VxRail - Warning stating: Insufficient resources to satisfy configured failover level for vSphere HA

Summary: Insufficient resources to satisfy vSphere HA

Primary Product: VxRail Appliance Family

Product: VxRail Appliance Family more...

Last Published: 27 Mar 2020

Article Type: Break Fix

Published Status: Online

Version: 3

Dell EMC VxRail - Warning stating: Insufficient resources to satisfy configured failover level for vSphere HA

Article Content

Issue


VDI VMs cannot be powered up and the following alert is shown in vCenter: Insufficient resources to satisfy configured failover level for vSphere HA

Insufficient Error Message
Cause
Cause: Quickstats are not up to date.

Quickstats Information message

 
Resolution
Restart management services on all hosts showing the quickstats warning via the DCUI
  1. Connect to the console of your ESXi host.
  2. Press F2 to customize the system.
  3. Log in as root.
  4. Use the Up/Down arrows to navigate to Troubleshooting Options > Restart Management Agents.
  5. Press Enter.
  6. Press F11 to restart the services.
  7. When the service restarts, press Enter.
  8. Press Esc to log out.
If VXR014030 warning appears on any host stop and then restart HA
  1. vCenter
  2. Cluster level
  3. Config
  4. Vsphere availability
  5. Uncheck box for  Vsphere Availability 
  6. OK
  7. Enter Vsphere availability again and re-check the box
  8. Save
Reset the warning to green
Power up VMs that cannot start
 
Notes

Issue


VDI VMs cannot be powered up and the following alert is shown in vCenter: Insufficient resources to satisfy configured failover level for vSphere HA

Insufficient Error Message
Cause
Cause: Quickstats are not up to date.

Quickstats Information message

 
Resolution

Restart management services on all hosts showing the quickstats warning via the DCUI
  1. Connect to the console of your ESXi host.
  2. Press F2 to customize the system.
  3. Log in as root.
  4. Use the Up/Down arrows to navigate to Troubleshooting Options > Restart Management Agents.
  5. Press Enter.
  6. Press F11 to restart the services.
  7. When the service restarts, press Enter.
  8. Press Esc to log out.
If VXR014030 warning appears on any host stop and then restart HA
  1. vCenter
  2. Cluster level
  3. Config
  4. Vsphere availability
  5. Uncheck box for  Vsphere Availability 
  6. OK
  7. Enter Vsphere availability again and re-check the box
  8. Save
Reset the warning to green
Power up VMs that cannot start
 

Notes

Article Attachments

Attachments

Attachments

Article Properties

First Published

Thu Jan 23 2020 16:47:19 GMT

First Published

Thu Jan 23 2020 16:47:19 GMT

Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters