Connectrix Brocade：DCX8510-8B 重新启动并显示错误 处理器重新启动 - 重置

Summary: DCX8510-8B 重新启动并显示错误“Processor reboed - Reset”

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

交换机意外重新启动。开机自检，两个 CP 均已启用且 HA 已同步。
  
Fabric OS:  v8.2.3c 
/fabos/cliexec/hadump:
Local CP (Slot 6, CP0): Active, Cold Recovered
Remote CP (Slot 7, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized

errdump :
[HAM-1004], SLOT 7 | CHASSIS, INFO, Processor rebooted - Reset., reboot.c
[PLAT-5067], SLOT 7 | CHASSIS, INFO, Disabling PCI timeout detect. Rev 4, modular_proc.


发现插槽 7 中的 CP 在 emtraceshow2 输出中出现故障。
 
提醒：有一个名为 EMTRACESHOW2 的根级命令。它是 supportave 的一部分，显示组件在重新启动后启动。

插槽 7 列出了一个 FLT（故障）。没有其他任何其它问题的迹象。
   
/fabos/cliexec/emtraceshow2:
Object  Before     SCN        Send       After      privSt m fo date/time
Slot 7   IN(20000) FLT(10014) ----------  IN(20000) 000000 1 0  Jan 29 14:20:51


CP BLADE Slot: 7 
Header Version:  2
Power Consume Factor:  -40W
Factory Part Num:  60-1000376-10
Factory Serial Num:  xxxxx
Manufacture:  Day: 16 Month: 6 Year: 2012
Update:  Day: 1 Month: 2 Year: 2023
Time Alive:  3742 days
Time Awake:  3 days


Cause

硬件故障

Resolution

修复：
1） 重新拔插位于插槽 7 的备用 CP。然后，它将经历开机自检并从错误状态恢复。
2） 如果重装 CP 刀片无法解决问题，请更换 CP 刀片。 

Affected Products

Connectrix ED-DCX8510-8B

Products

Connectrix B-Series
Article Properties
Article Number: 000210195
Article Type: Solution
Last Modified: 26 Jun 2023
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.