How to Configure a Private VLAN (PVLAN) and Port Group on your vSphere Distributed Switch (vDS) in VMware vSphere ESXi 5.x
This article provides information on how to configure a Private VLAN (PVLAN) and port group on your vSphere Distributed Switch (vDS) in vSphere 5.x.
Resumen:This article provides information on how to configure a Private VLAN (PVLAN) and port group on your vSphere Distributed Switch (vDS) in vSphere 5.x.
Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.
Contenido del artículo
Instrucciones
Types of PVLANS
Promiscuous : Primary PVLAN - Default PVLAN and can communicate with any port in the VLAN.
Isolated : Secondary PVLAN - Only able to communicate with the promiscuous port.
Community : Secondary PVLAN - Able to communicate with other ports on the VLAN and the promiscuous port.
How to Configure a Private VLAN (PVLAN) and Port Group on your vSphere Distributed Switch (vDS) in VMware vSphere ESXi 5.x
Set the physical switch port to trunk and any PVLANs added on your vDS need to be added to the trunk on the physical switch port.
In the vSphere Client, go to the home screen and click on Networking
Right click on the distributed switch you want to configure a PVLAN and then click on Edit Settings
Click on the Private VLAN tab
Under Primary private VLAN ID, click on [Enter a private VLAN ID here] to input your primary PVLAN ID. NOTE: This will be your promiscuous PVLAN by default
To add secondary PVLANS, click on [Enter a private VLAN ID here] under Secondary private VLAN ID and input a PVLAN ID
From the Type dropdown, choose whether you want an Isolated or Community PVLAN
Click on the OK button
Right click on your distributed switch and click on New Port Group
Input your name for your port group
From the VLAN type dropdown, choose Private VLAN
Choose the Primary VLAN you want to use for this port group and then click on the Next button
Review all of the settings and click on the Finish button