Connectrix B-Series Firmware: FOS user authentication works but has no permissions when configuring authentication
Resumen: While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands. ...
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Instrucciones
Symptom: User logs in correctly but has no user permissions to run any commands.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Productos afectados
ConnectrixProductos
Connectrix B-Series HardwarePropiedades del artículo
Número del artículo: 000022769
Tipo de artículo: How To
Última modificación: 07 ene 2026
Versión: 4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.