The Secure Boot Error Message Prompts During the Restore Process
Resumen: An Ubuntu 20.04 device with Dell Client Agent - Enabler (DCA Enabler) configured encounters a Secure Boot error message that is displayed while the operating system restore is in process. ...
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
Affected Products:
- Most products shipping with Ubuntu 20.04 with DCA Enabler configuration
Note: Observed mostly on products that have an NVIDIA driver
User performs recovery option on the device and the device starts the restore process, then the below message is displayed. The device is stops responding and cannot progress.

Figure 1: (English Only) Error message received during Ubuntu recovery process
Causa
This issue is happening because the Dell Recovery Tool detects the device to be a Dell Hybrid Client computer while recovery and during Ubuntu Base operating system install it skips some scripts (relevant to Secure boot pre-apply configuration to backup existing signature keys). Then, it tries to reenable the Secure boot which results in the above dialog being displayed for NVIDIA driver component devices. The workflow should be to install standard Ubuntu for a DCA Enabler.
Resolución
To resolve this:
- Once the user is on the above screen, shut the device down, and then power the device back on.
- While restarting, disable secure boot manually from the BIOS, save, and exit.
Note:
- This process varies depending on the device.
- The device reboots.
- Once restarted, the restore process should continue.
Productos afectados
Dell Hybrid ClientPropiedades del artículo
Número del artículo: 000195379
Tipo de artículo: Solution
Última modificación: 30 sept 2024
Versión: 4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.