Data Domain: DD3300 디스크 비콘
Resumen: 이 문서에서는 DDOS(Data domain Operating System) 6.2.x와 함께 제공되는 DD3300 시스템용 디스크 비콘 기능을 소개합니다. KB 문서는 DD3300에서 디스크를 비콘하는 방법에 대한 가이드 역할을 합니다.
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Instrucciones
요약:
- 이 문서에서는
disk beaconDD3300 시스템용 기능; DDOS 6.2.x에 도입되었습니다. - 이 상태에서는 다음 명령을 실행할 경우
disk beacon 1.n발행된 경우(SSH/CLI)을 표시하고 해당 디스크에서 디스크 식별 LED가 깜박입니다. - DD3300의 물리적 슬롯 번호 지정(0부터 시작, 1.0)은 1.1부터 시작하는 DDOS 슬롯 번호와 일치하지 않습니다.
- 이 기능은 DD3300에서 장애가 발생한 디스크의 문제 해결 및 교체에 도움이 됩니다.
적용 대상:
- DD3300(>= DDOS 6.2.x)
해결 방법:
- 12x 전면 디스크(1.1 -> 1.12) 또는 1x 후면 디스크(1.13) 비콘을 설정할 수 있습니다.
- 4x 내부 디스크(1.15 -> 1.18)는 비콘을 지원하지 않습니다.
- DD-CLI 명령 구문:
-
disk beacon 1.<slot number> OR <serial number>
-
- Beacon press를 중지하려면:
-
Ctrl + C
-
예:
비콘 디스크 슬롯 1.7:
# disk beacon 1.7
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
일련 번호로 디스크를 비콘하려면 다음을 수행합니다.
- 를 사용하여 물리적 하드웨어 일련 번호를 수집합니다.
disk show hardware detailed명령어와 동일한 방식으로 AUTHC를 사용합니다.
# disk show hardware detailed
Physical Hardware
Disk Slot Manufacturer/Model Firmware Serial No. Capacity Type State
(pci/idx)
---- --------- ------------------ -------- -------------- ---------- -------- --------
1.1 0 ST4000NM0295 DT31 ZC11Z1GB 3.64 TiB SAS In Use
1.2 1 ST4000NM0295 DT31 ZC1207Y1 3.64 TiB SAS In Use
1.3 2 ST4000NM0295 DT31 ZC12156M 3.64 TiB SAS In Use
1.4 3 ST4000NM0295 DT31 ZC11Z2G6 3.64 TiB SAS In Use
1.5 4 ST4000NM0295 DT31 ZC12108B 3.64 TiB SAS In Use
1.6 5 ST4000NM0295 DT31 ZC120E4S 3.64 TiB SAS In Use
1.7 6 ST4000NM0295 DT31 ZC11Z17L 3.64 TiB SAS In Use
1.8 7 ST4000NM0295 DT31 ZC1207YX 3.64 TiB SAS In Use
1.9 8 ST4000NM0295 DT31 ZC11Z39H 3.64 TiB SAS In Use
1.10 9 ST4000NM0295 DT31 ZC11Z3NW 3.64 TiB SAS In Use
1.11 10 (absent) (absent) (absent) (absent) (absent) Absent
1.12 11 (absent) (absent) (absent) (absent) (absent) Absent
1.13 12 MZ7KM480HMHQ0D3 GD53 S3BUNX0J600149 447.13 GiB SATA-SSD Non-RAID
---- --------- ------------------ -------- -------------- ---------- -------- --------
- 적절한 일련 번호를 사용하여 디스크를 비콘합니다.
# disk beacon ZC11Z17L
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
Información adicional
디스크 비콘이 다른 디스크(다른 SSH 세션에서)에서 이미 활성 상태인 경우 시스템은 다음과 같이 활성 비콘을 중지하라는 프롬프트를 표시합니다.
# disk beacon 1.13
A beacon command is already running on disk 1.7.
Do you want to terminate it? (yes|no) [yes]: yes
Beacon on disk 1.7 terminated.
Start disk LED beaconing for 1.13 ...
^C
LED beaconing completed.
#
원래 SSH 세션에는 다음과 같은 출력이 표시됩니다.
**** Disk beaconing terminated by another disk beacon operation.
참조:
Productos afectados
Data DomainProductos
Data Domain, DD3300 AppliancePropiedades del artículo
Número del artículo: 000013951
Tipo de artículo: How To
Última modificación: 06 feb 2026
Versión: 7
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.