Número del artículo: 521715

printer Imprimir mail Correo electrónico

VNX/VNXe Family: Issues with native multipath on Red Hat Enterprise Linux

Resumen: Red Hat Linux servers loses paths and applications become unavailable and in some cases reboot server

Producto principal: VNX/VNXe Family

Producto: VMAX Family más…

Fecha de la última publicación: 23 mar. 2020

Tipo de artículo: Break Fix

Estado publicado: En línea

Versión: 4

VNX/VNXe Family: Issues with native multipath on Red Hat Enterprise Linux

Contenido del artículo

Problema


Red Hat Enterprise Linux 6 and 7 lose devices by issues on paths and native multipath is not witching over to their alternate paths in a timely fashion, which causes production applications to become unavailable and in some cases rebooting.

Check multipath.conf and configuration its the same recommended on Host connectivity guide for Linux.

 Servers have more than one path to device / hba.

 
Causa
  • There are multiple parameters that affect error detection and failover times.
    dev_loss_tmo
    fast_io_fail_tmo
    checker_timeout

  • The dev_loss_tmo (rport) effects extended link timeout, in-flight io is held after a link down event for seconds before the driver gives up waiting for the port to come back. Default is 30-35s, so in-flight io can be held seconds before being killed off. After timeout expiration, rport is put in offline (down) state.

  • The fast_io_fail_tmo (rport) effects how long io is queued and held while rport is in blocked state.

  • checker_timeout specify the timeout to user for path checkers that issue scsi commands with an explicit timeout, in seconds; default taken from /sys/block/sd/device/timeout

  • polling_interval - interval between path checks in seconds.

Resolución
  • Add the following parameters to the defaults{} section in /etc/multipath.conf:
defaults {
        polling_interval 5
        fast_io_fail_tmo 5
        dev_loss_tmo 10
        checker_timeout 15
}
  • Reload multipathd:
# service multipathd reload
Notas

Problema


Red Hat Enterprise Linux 6 and 7 lose devices by issues on paths and native multipath is not witching over to their alternate paths in a timely fashion, which causes production applications to become unavailable and in some cases rebooting.

Check multipath.conf and configuration its the same recommended on Host connectivity guide for Linux.

 Servers have more than one path to device / hba.

 
Causa
  • There are multiple parameters that affect error detection and failover times.
    dev_loss_tmo
    fast_io_fail_tmo
    checker_timeout

  • The dev_loss_tmo (rport) effects extended link timeout, in-flight io is held after a link down event for seconds before the driver gives up waiting for the port to come back. Default is 30-35s, so in-flight io can be held seconds before being killed off. After timeout expiration, rport is put in offline (down) state.

  • The fast_io_fail_tmo (rport) effects how long io is queued and held while rport is in blocked state.

  • checker_timeout specify the timeout to user for path checkers that issue scsi commands with an explicit timeout, in seconds; default taken from /sys/block/sd/device/timeout

  • polling_interval - interval between path checks in seconds.

Resolución

  • Add the following parameters to the defaults{} section in /etc/multipath.conf:
defaults {
        polling_interval 5
        fast_io_fail_tmo 5
        dev_loss_tmo 10
        checker_timeout 15
}
  • Reload multipathd:
# service multipathd reload

Notas

Article Attachments

Adjuntos

Adjuntos

Propiedades del artículo

Publicado por primera vez

jue. may. 31 2018 11:02:09 GMT

Publicado por primera vez

jue. may. 31 2018 11:02:09 GMT

Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters