NetWorker: Creating a Data Domain device fails with error: Authentication type AUTH_NONE not adequate
Resumen: Attempting to create a NetWorker Data Domain device fails, peer information must be cleared on all involved hosts for the other hosts.
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
Data Domain device creation fails in NetWorker, the following error is observed:
authentication error: Rd=SN-NAME:DD-NAME_DEV-NAME Authentication type AUTH_NONE not adequate
Where SN-NAME is the name of the remote storage node.
Where DD-NAME is the name of the Data Domain.
Where DEV-NAME is the name of the device user is attempting to create.
Causa
Corrupted NetWorker peer information between the NetWorker server and the Storage Node managing the device.
Resolución
Clear the NetWorker peer information on both the NetWorker server and storage nodes observing this failure. One of the following methods can be used:
- NetWorker: How to clear NSR peer information mismatches automatically using nsradmin -C
- NetWorker: Fixing inconsistent NSR peer information
NOTE: If the NetWorker Management Console (NMC) server is on a separate host from the NetWorker server, the NMC server's peer information should also be cleared.
Productos afectados
NetWorkerProductos
NetWorker, NetWorker SeriesPropiedades del artículo
Número del artículo: 000036946
Tipo de artículo: Solution
Última modificación: 14 ene 2026
Versión: 4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.