VxRail: HTTPS Proxy Yapılandırıldığında OVF Dağıtılamamaktadır

Resumen: HTTPS proxy'si yapılandırıldığında OVF dağıtılamamaktadır.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Síntomas

/var/log/vmware/vpxd.log dosyasında aşağıdakine benzer hatalar görülür:
Unrecognized SSL message, plaintext connection?, note that HTTP/s proxy is configured for the transfer
2020-09-16T14:41:59.004+02:00 info vpxd[14866] [Originator@6876 sub=Default opID=2b691553-01] [VpxLRO] -- ERROR task-1978410 -- UPSA913s-x64-VM01-noV
APP -- ResourcePool.ImportVAppLRO: vim.fault.OvfImportFailed:
--> Result:
--> (vim.fault.OvfImportFailed) {
-->  faultCause = (vmodl.fault.SystemError) {
-->   faultCause = (vmodl.MethodFault) null,
-->   faultMessage = (vmodl.LocalizableMessage) [
-->     (vmodl.LocalizableMessage) {
-->      key = "com.vmware.ovfs.ovfs-main.ovfs.transfer_failed",
-->      arg = (vmodl.KeyAnyValue) [
-->        (vmodl.KeyAnyValue) {
-->         key = "0",
-->         value = "Invalid response code: 403, note that HTTP/s proxy is configured for the transfer"
-->      message = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->   reason = ""
-->   msg = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->  faultMessage = 

Causa

OVF dağıtım işlemi, proxy sunucusuna şu hatayla bağlanamıyor: 
Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer.
Bu "Geçersiz yanıt kodu: 403 inç, hedef kaynağın erişime izin verilmiyor olduğunu belirten PROXY sunucusu tarafından verilen bir yanıttır. 

OVF aktarımı, bir proxy kullanılırken HTTPS özellikli bir proxy gerektirir. Proxy'nin HTTPS özellikli olduğundan emin olun veya proxy'yi atlamak için aşağıdaki geçici çözümleri kullanın.

Resolución

  1. Aşağıdaki iki yöntemden birini kullanarak bu sorunu geçici olarak çözümleyin. Aşağıdakiler büyük /küçük harfe duyarlıdır:
  • HTTPS PROXY yapılandırmasını HTTP'yi kullanmak üzere değiştirin:
  1. /etc/sysconfig/proxy dosyasını değiştirin. Değeri https HTTPS_PROXY http'ye güncelleştirmek için aşağıdaki satırı değiştirir:
From:
HTTPS_PROXY="https://proxy.domain.tld:3128/"

To:
HTTPS_PROXY="http://proxy.domain.tld:3128/"
  1. Proxy sunucusunun FQDN'si çalışmazsa alternatif olarak IP adresini kullanın.
  2. 7.0 U1'den önceki bir sürümdey iyylediğinizde VCSA'yı yeniden başlatın. Aksi takdirde hizmetleri şu komutla yeniden başlatın:
# service-control --stop --all && service-control --start --all
  • Proxy'yi atlamak için ana NO_PROXY yapılandırmaya ekleme:
  1. vCenter Sunucusuna Bağlanmak için bir SSH oturumu kullanın.
  2. /etc/sysconfig/proxy dosyasını değiştirin. ESXi ana bilgisayar FQDN'lerini veya IP'lerini aşağıdaki satıra, virgülle ve ardından boşluk karakteriyle ayrılmış şekilde ekleme. Örneğin:
NO_PROXY="localhost, 127.0.0.1, ESXi-01.test.com"
  1. İçerik kitaplığından ve vSphere İstemciden OVF dağıtımını deneme.

Productos afectados

VMWare Cloud on Dell EMC VxRail E560F, VMWare Cloud on Dell EMC VxRail E560N, VxRail Appliance Family, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes , VxRail Software ...

Productos

XC Core Systems, XC Series Appliances, VxRail V Series Nodes, VxRail VD Series Nodes
Propiedades del artículo
Número del artículo: 000216499
Tipo de artículo: Solution
Última modificación: 19 ago. 2023
Versión:  2
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.