MFE TF-kloon of snap: Onjuiste track count-waarde gerapporteerd met bericht ESNP1AII.

Resumen: Bij Snap-bewerkingen op grote R1-apparaten meldt ESNP1AII een onjuiste waarde voor het aantal tracks.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Síntomas

In bericht ESNP1AII werd het aantal tracks dat wacht om te worden gedefinieerd onjuist gerapporteerd als 0.   
  
Example (Dell EMC CS lab): 

ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:0

Inline: 

UTILITY A7 -- Show system devices Attrib/WP/Invalid utility_a7_c
NOT WRT RDF
READY DIS. TYPE GROUP DEVICE WRT | INVALID TRACKS COUNTS (PHCO)
DV# M1234 1234 1234 I II ATTRIBUTES PEND | M1 M2 M3 M4
---------------------------------------------------------|-----------------------------------------------
1AED .-.- .-.- T-F- BB ufsT...LTGT.......... 0 | 0 167772165 145815287 167772165

Expected behaviour: 

ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:167728193
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:150345220
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:108735872
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:95637968
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:76163641
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:70943775
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:65584717
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:42642180
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:17399737
ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED, DEVICE#:00001AED S/N:0001976018xx REMAINING TRACKS:3130933

Causa

Dit is te wijten aan een softwareprobleem.

Resolución

De verwerking is aangepast om het timingprobleem correct te verwerken om ervoor te zorgen dat de CQNAME-opdrachtvolgorde wordt gehonoreerd.      

Permanente oplossing:
  • Voor Mainframe Enablers 8.5 is PTF SN85074 ontwikkeld om het probleem te verhelpen. Het is beschikbaar om te downloaden van Dell Online Support

Información adicional

Foutmelding: 

ESNP1AII
WACHTEN TOT HET DOEL VOLLEDIG IS GEDEFINIEERD, APPARAATNR.:symdv#
S/N:symmserial REMAINING TRACKS:count
Cause
Voordat u de koppeling ongedaan maakt, wordt een query uitgevoerd op het doelapparaat om ervoor te zorgen dat het wordt gedefinieerd. Als het nog niet is gedefinieerd, wordt dit bericht uitgegeven.
Actie
Geen.

OPMERKING PTF-afdekplaat:
  
++PTF(SN85074) REWORK(2022053) .                               
++VER(Z038) FMID(SSNP850)                                      
      PRE(                                                     
          SN85060                                               
          )                                                    
   /*                                                          
*------------------------------------------------------------- 
* PROBLEM DESCRIPTION(S):                                       
* ------------------------------------------------------------ 
* USERS AFFECTED: Snap operations on large R1 devices          
* PROBLEM DESCRIPTION: Incorrect track count value             
* DESCRIPTION DETAIL:                                          
*                                                              
* In message ESNP1AII the number of tracks that are waiting to 
* be defined was incorrectly being reported as 0.              
*                                                              
* ESNP1AII WAITING FOR TARGET TO BE FULLY DEFINED,              
*        DEVICE#:0000XXXX S/N:XXXXXXXXXXXX REMAINING TRACKS:0  
*                                                              
*                                                              
* PROBLEM RESOLUTION:                                           
*                                                              
* The message format has been changed to display the correct   
* track count.                                                 
*                                                               
* MODULES: ESNAXBAR                                            
*                                                              
* ------------------------------------------------------------ 
* SN85074 22 Feb 2022 08:03:48                                  
* ------------------------------------------------------------ 

Productos afectados

Mainframe Enablers
Propiedades del artículo
Número del artículo: 000197040
Tipo de artículo: Solution
Última modificación: 19 jun 2023
Versión:  5
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.