OpenManage Enterprise 4.6 Support Matrix

Resumen: This is the latest version of the Dell OpenManage Enterprise 4.6 Support Matrix.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Instrucciones

Expand the links to view information about servers, chassis, networking devices, VxRail, agents, hypervisors, OSs, and plug-ins supported by OpenManage Enterprise 4.6.

|

This section provides recommended hardware requirements for OpenManage Enterprise appliances running with and without plugins in small and large deployments. For more information about plug-in hardware requirements, see the User's Guide of the respective OpenManage Enterprise plug-ins available on the support site.

Maximum recommended hardware configuration

OpenManage Enterprise appliance is shipped with the maximum recommended hardware requirements to provide you a hassle-free deployment and installation of the appliance and plug-ins respectively. However, if your environment doesn't require the maximum hardware configuration, see "Manage memory and CPU requirements based on deployment size" section in this Support Matrix to determine the appropriate hardware resources required for your specific requirements. The following table lists recommended hardware requirements for installing OpenManage Enterprise and all of its plug-ins:

Table 1: Maximum recommended hardware configuration
Hardware configuration Recommended configuration
RAM 64 GB
Processor cores 8
Hard drive space 415 GB
  • *The OpenManage Enterprise appliance is configured with a single virtual drive of 415 GB. This drive is utilized for the core application and database, and any additional features and supporting plugins. During deployment, the appliance boots and functions fully using this single virtual drive, and no additional virtual drive are required for TUI configuration or feature enablement.
  • *Ensure that your hypervisor storage has enough free space to support the recommended virtual drive size of the appliance, and enough overhead to support snapshots and future expansion of the virtual drive.
  • *Ensure that the primary drive and the secondary drive are always identical in storage capacity.
NOTE: OpenManage Enterprise now supports only monitoring featrues such as discovery, hardware inventory, health, and alert up to 25,000 devices. To operate at this scale, the OpenManage Enterprise appliance must be configured with 256 GB RAM and 64 CPU cores. No other features or plug-ins are supported at this scale. For more information, see the Recommended OpenManage Enterprise configuration for monitoring 25,000 devices section in the OME User's Guide available on the support site.

Manage memory and CPU requirements based on deployment size

If your environment doesn't require the generic maximum hardware configuration, use the following table to determine the appropriate hardware resources required for your specific requirements such as large-scale or small-scale deployments:

Table 2: Extra-large deployment where the maximum number of devices monitored by OpenManage Enterprise is up to 25,000
OpenManage Enterprise appliance and plug-ins Minimum RAM* Minimum Cores
OpenManage Enterprise
NOTE: Plug-ins not supported in extra-large deployments (up to 25,000 devices). For more information, see the "Recommended OpenManage Enterprise configuration for monitoring 25,000 devices" in the User's Guide available on the support site.
256 GB 64
Table 3: Large deployment—Number of managed devices is between 1,000 and 8,000
OpenManage Enterprise appliance and plug-ins Minimum RAM* Minimum Cores
OpenManage Enterprise 40 GB 8
Additional requirements for each plug-in
Dell AIOps (Default plug-in) +4 GB 8
Services (Default plug-in) +8 GB 8
Update Manager +1 GB 8
OpenManage Enterprise Integration for VMware vCenter (OMEVV) +5 GB 8
Operations Manager (Integration for Microsoft SCOM) +3 GB 8
VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) +1 GB 8
Total recommended hardware configuration with all plug-ins installed 64 GB 8 CPU cores
Table 4: Small deployment—Number of managed devices is less than 1,000
OpenManage Enterprise appliance and plug-ins Minimum RAM* Minimum Cores
OpenManage Enterprise 19 GB 4
Additional requirements for each plug-in
Dell AIOps (Default plug-in) +2 GB 4
Services (Default plug-in) +8 GB 4
Update Manager +1 GB 4
OpenManage Enterprise Integration for VMware vCenter (OMEVV) +5 GB 4
Operations Manager (Integration for Microsoft SCOM) +3 GB 4
VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) +1 GB 4
Total recommended hardware configuration with all plug-ins installed 40 GB 4 CPU Cores

Lists the supported plug-ins that can be enabled for additional OpenManage Enterprise monitoring and management capabilities.

Table 5: Plug-ins supported by OME
Plug-in Supported Versions Description
OpenManage Enterprise Services (Default plug-in) 4.6 Enables proactive and predictive monitoring and management support for devices with ProSupport and ProSupport Plus entitlements.
Update Manager 2.0 Enables administrators to create and manage repositories for PowerEdge devices with iDRAC or Windows that are managed in OpenManage Enterprise.
Dell AIOps (Default plug-in) 2.6 Enables administrators to register with the Dell AIOps, select the device groups for data transfer to Dell AIOps for proactive monitoring and measurement of overall health of the selected devices.
OpenManage Enterprise Integration for VMware vCenter (OMEVV) 1.9 Enables streamlining the management processes in your data center environment by allowing you to use VMware vCenter Server to manage your full server infrastructure - both physical and virtual.
VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) 1.8 Enables you to add the Microsoft System Center Configuration Manager (MCM) and System Center Virtual Machine Manager (SCVMM) consoles to OpenManage Enterprise. After synchronizing devices, you can install Microsoft Windows OS on PowerEdge servers using an OpenManage Enterprise Advanced+ license. Using the Cluster-Aware Updating feature, you can update the firmware and drivers on the SCVMM-managed cluster nodes.
Operations Manager 1.7 Enables the monitoring of the Dell hardware assets that are discovered in OpenManage Enterprise using the System Center Operations Manager (SCOM) console.
NOTE: Plug-ins released with OpenManage Enterprise 4.6 are not compatible with previous versions of OpenManage Enterprise.

Supported devices, VxRail, agents, hypervisors, and OSs

The following table lists the platforms supported in OpenManage Enterprise for features such as discovery and inventory, monitoring and alerts, firmware management, configuration and deployment, and power management.

  • Yes - Supported
  • No - Not supported

 

Yes
Table 6: Supported platforms and features in OpenManage Enterprise
Platforms Discovery and inventory Monitoring and device alerts Managing device firmware Managing device configurations and deployment Power Management
PowerEdge 17G servers Yes Yes Yes Yes Yes
PowerEdge 16G servers Yes Yes Yes Yes Yes
PowerEdge 15G servers Yes Yes Yes Yes Yes
PowerEdge 14G servers Yes Yes Yes Yes Yes
NOTE: The following devices do not support power management: PowerEdge R240 and T640.
PowerEdge C series servers Yes Yes Yes Yes Yes
NOTE: The folowing device does not support power management: PowerEdge C4140.
PowerEdge AX node series servers Yes Yes No
NOTE: While OpenManage Enterprise does not support the actual update of firmware, AX nodes are still included when generating update compliance reports.
Yes No
PowerEdge XC series devices Yes Yes No No Yes
NOTE: The following devices do not support power management: PowerEdge XC4510c, XC4520c, XC6400, XC640ENT XC Core,XC740xdENT XC Core,XC940ENT XC Core, XC6420ENT XC Core, XC6400 ENCLOSURE XC Core, XCXR2 Core, XC740xd2 Core, XC760-24N, and XC7625-24N.
PowerEdge XE series devices Yes Yes Yes
NOTE:The firmware update operation is supported on the following server models:
  • XE9680 (Nvidia HGX H100 80GB SXM5 GPU)
  • XE9680 (Nvidia HGX H200 141GB SXM5 GPU)
NOTE:To make the firmware update effective on acclerators such as a GPU, you must perform a manual AC Power Cycle operation by disconnecting and connecting the power cable.
Yes
NOTE: The following device does not support managing device configurations and deployment: PowerEdge XE7745.
Yes
NOTE: The following devices do not support power management: PowerEdge XE7740, PowerEdge XE9680L, and PowerEdge XE9685L.
PowerEdge XR series devices Yes Yes
NOTE: The following device does not support device firmware update operation: PowerEdge XR2.
Yes Yes
NOTE: The following devices do not support power management: PowerEdge XR2 and PowerEdge XR5610c.
Chassis Yes Yes Yes No
NOTE: The following device supports the device configuration and deployment: PowerEdge MX7000.
Yes
NOTE:
  • The following device does not support power management: PowerEdge M1000e.
  • The following devices do not support power management with viewer credentials: PowerEdge M1000e, PowerEdge VRTX, PowerEdge FX2, and PowerEdge FX2s chassis.
VxRail appliances Yes Yes No No Yes
NOTE: The following devices do not support power management: VxRail E665N, VxRail P470N, VxRail 6470F, VxRail D560F, and VxRail VS-760.
PowerEdge HS series servers Yes Yes Yes Yes No
vSAN Ready Nodes Yes Yes No
NOTE: Use OpenManage Enterprise Integration for VMware vCenter plug-in for firmware update.
No
NOTE: Use OpenManage Enterprise Integration for VMware vCenter plug-in for managing device configuration and deployment.
No
Dell Storage modules Yes Yes No No No
Dell Storage (Compellent) Yes Yes No No No
PowerVault MD Series devices Yes Yes No No No
PowerVault ME4 Series devices Yes Yes No No No
PowerVault ME5 Series devices Yes Yes No No No
PowerVault NX Series devices Yes Yes No No No
PowerFlex devices Yes Yes No No Yes
Coolant Distribution Units (CDU) Yes Yes No No Yes
Power Shelves Yes Yes Yes No Yes
Power Distribution Unit (PDU) Yes No No No Yes
Uninterruptible Power Supply (UPS) Yes No No No Yes
Non Dell servers Yes No No No Yes
Networking Devices Yes Yes No
NOTE: The following device supports managing device firmware: MX5108N.
No
NOTE: The following device supports managing device configuration and deployment: MX5108N.
No
Integrated Rack Control (IRC) Yes Yes Yes No Yes

NOTE: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
List of supported PowerEdge 17G servers:
  • PowerEdge R770
  • PowerEdge R670
  • PowerEdge R470
  • PowerEdge R6715
  • PowerEdge R6725
  • PowerEdge R7715
  • PowerEdge R7725
  • PowerEdge R7725xd
  • PowerEdge R570
  • PowerEdge M7725
  • PowerEdge R770AP*

NOTE:
  • An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
  • Firmware and Driver update on R760 with Azure Stack HCI 23H2 OS are not supported from OpenManage Enterprise.
List of supported PowerEdge 16G servers:
  • PowerEdge R7625
  • PowerEdge R760
  • PowerEdge R760 With Azure Stack HCI 23H2 OS*
  • PowerEdge R760XS
  • PowerEdge R660
  • PowerEdge R660XS
  • PowerEdge MX760c
  • PowerEdge R6625
  • PowerEdge R6615
  • PowerEdge R7615
  • PowerEdge R860
  • PowerEdge R960
  • PowerEdge R760xa
  • PowerEdge R760xd2
  • PowerEdge T560
  • PowerEdge T360
  • PowerEdge R360
  • PowerEdge R260
  • PowerEdge T160

List of supported PowerEdge 15G servers:
  • PowerEdge R6515
  • PowerEdge R6525
  • PowerEdge R7515
  • PowerEdge R7525
  • PowerEdge R650
  • PowerEdge R750
  • PowerEdge R750xa
  • PowerEdge MX750c
  • PowerEdge R450
  • PowerEdge R550
  • PowerEdge R650xs
  • PowerEdge R750xs
  • PowerEdge T350
  • PowerEdge T150
  • PowerEdge T550
  • PowerEdge R250
  • PowerEdge R350

List of supported PowerEdge 14G servers:
  • PowerEdge M640
  • PowerEdge R240
  • PowerEdge R340
  • PowerEdge R440
  • PowerEdge R540
  • PowerEdge R640
  • PowerEdge R6415
  • PowerEdge R740
  • PowerEdge R740xd
  • PowerEdge R740xd2
  • PowerEdge R7415
  • PowerEdge R7425
  • PowerEdge R840
  • PowerEdge R940
  • PowerEdge R940XA
  • PowerEdge T140
  • PowerEdge T340
  • PowerEdge T440
  • PowerEdge T640
  • PowerEdge FC640
  • PowerEdge MX740c
  • PowerEdge MX840c

NOTE: OpenManage Enterprise does not support PowerEdge 13G or earlier generation servers.

List of supported PowerEdge C series servers:
  • PowerEdge C4140
  • PowerEdge C6420
  • PowerEdge C6525
  • PowerEdge C6520
  • PowerEdge C6620
  • PowerEdge C6615

NOTE:While OpenManage Enterprise does not support the actual update of firmware, AX nodes are still included when generating update compliance reports.
List of supported PowerEdge AX Node series servers:
  • AX-640
  • AX-650
  • AX-6515
  • AX-740xd
  • AX-750
  • AX-7525
  • AX-760
  • AX-660
  • AX-4510c
  • AX-4520c

NOTE: OpenManage Enterprise currently does not support OEM MX7000 chassis.

Dell OEM devices (rebranded or de-branded PowerEdge servers), when discovered, are classified under System Groups > All Devices > Servers > OEM Servers on the All Devices page. If both the server and DRAC of the OEM device are discovered, they are correlated and displayed as one device under the OEM Devices group. Most of the functionality available to the PowerEdge servers—such as tasks, reports, and filters—are also available to the PowerEdge OEM servers. However, system update may not be possible if it is not supported by the OEM device module.

NOTE:
  • The SATADOM-specific information is not displayed in the device inventory of OpenManage Enterprise.
  • An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
List of supported PowerEdge XC series servers:
  • XC450
  • XC4510c
  • XC4520c
  • XC640
  • XC650
  • XC740xd
  • XC750
  • XC750xa
  • XC6420
  • XC940
  • XC640ENT XC Core
  • XC740xdENT XC Core
  • XC940ENT XC Core
  • XC6420ENT XC Core
  • XC6515
  • XC6520
  • XC7525
  • XCXR2 Core
  • XC740xd2 Core
  • XC660-10
  • XC660-12N
  • XC660xs-4
  • XC660xs-4s
  • XC760-14
  • XC760-24
  • XC760-24N
  • XC760xa
  • XC7625-14
  • XC7625-24N

NOTE:
  • An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
  • Node-initiated discovery is not supported for XE9685L.
List of supported PowerEdge XE series servers:
  • PowerEdge XE2420
  • PowerEdge XE7420
  • PowerEdge XE7440
  • PowerEdge XE8545
  • PowerEdge XE9680
  • PowerEdge XE8640
  • PowerEdge XE9640
  • PowerEdge XE7745
  • PowerEdge XE7740
  • PowerEdge XE9680L
  • PowerEdge XE9685L
  • PowerEdge XE9780*
  • PowerEdge XE9780L*
  • PowerEdge XE9785L*
  • PowerEdge XE9785*
  • PowerEdge XE8712*

List of supported PowerEdge XR series servers:
  • PowerEdge XR2
  • PowerEdge XR11
  • PowerEdge XR12
  • PowerEdge XR4510c
  • PowerEdge XR4520c
  • PowerEdge XR7620
  • PowerEdge XR5610
  • PowerEdge XR5610c
  • PowerEdge XR8620t
  • PowerEdge XR8610t
  • PowerEdge XR8720t*

List of supported PowerEdge Modular Infrastructure servers:
  • PowerEdge MX7000
  • PowerEdge M1000e
  • PowerEdge VRTX
  • PowerEdge FX2
  • PowerEdge FX2s

List of supported Dell VxRail hyper-converged appliances:

  • VxRail D560
  • VxRail D560F
  • VxRail E460
  • VxRail E460F
  • VxRail E560
  • VxRail E560F
  • VxRail E560N
  • VxRail E660N
  • VxRail E660
  • VxRail E660F
  • VxRail E665
  • VxRail E665N
  • VxRail G560
  • VxRail G560F
  • VxRail P470N
  • VxRail P570
  • VxRail P570F
  • VxRail P580N
  • VxRail 6470F
  • VxRail V670F
  • VxRail S670
  • VxRail P470
  • VxRail P470F
  • VxRail P670N
  • VxRail P675F
  • VxRail P675N
  • VxRail P670F
  • VxRail S470
  • VxRail S570
  • VxRail V470
  • VxRail V470F
  • VxRail V570
  • VxRail V570F
  • VxRail VD-4510c
  • VxRail VD-4520c
  • VxRail VE-660
  • VxRail VE-6615
  • VxRail VP-760
  • VxRail VP-7625
  • VxRail VS-760

List of supported PowerEdge HS series servers:
  • PowerEdge HS5610
  • PowerEdge HS5620

NOTE:
  • OpenManage Enterprise supports vSAN Ready Nodes for discovery, inventory, monitoring, and device alerts only. To manage device firmware, configurations, and deployment, use the OpenManage Enterprise Integration for VMware vCenter plug-in.
  • An asterisk (*) next to a table name indicates that support for the devices has been added in this release.
List of supported vSAN Ready Nodes:
  • vSAN Ready Node C6420
  • vSAN Ready Node C6620
  • vSAN Ready Node MX760C
  • vSAN Ready Nodes R440
  • vSAN Ready Node R640
  • vSAN Ready Node R740xd
  • vSAN Ready Node R840
  • vSAN Ready Node R6415
  • vSAN Ready Node R7415
  • vSAN Ready Node R7425
  • vSAN Ready Node R650
  • vSAN Ready Node R750
  • vSAN Ready Node R6515
  • vSAN Ready Node R7515
  • vSAN Ready Node R7525
  • vSAN Ready Node R660
  • vSAN Ready Node R760
  • vSAN Ready Node R6615
  • vSAN Ready Node R6625
  • vSAN Ready Node R7615
  • vSAN Ready Node R7625
  • vSAN Ready Node R860

List of supported storage modules:
  • PowerEdge FD332

The following table lists the supported Dell Storage devices—previously Dell Compellent devices.

List of supported Storage (Compellent) modules:
  • FS8600 version 6
  • SC7020
  • SCv3000
  • SC9000
  • SC5020
  • SCv3020
  • SC3020 version 7.5.1

List of supported PowerVault MD series storage devices:
  • MD3220
  • MD3200
  • MD3200i
  • MD3800f
  • MD3820f
  • MD3860f
  • MD3800i
  • MD3820i
  • MD3400
  • MD3420
  • MD3460
  • MD3060e

List of supported PowerVault ME4 series storage devices:
  • ME4012
  • ME4024
  • ME4084 (not in the JBOD mode)

List of supported PowerVault ME5 series storage devices:
  • ME5024
  • ME5012
  • ME5084
  • ME5224

List of supported PowerVault NX series storage devices:
  • NX3340
  • NX3240

List of supported PowerFlex devices:
  • PowerFlex Rack R640
  • PowerFlex Rack R740xd
  • PowerFlex Rack R840
  • PowerFlex Rack R650
  • PowerFlex Rack R750
  • PowerFlex Rack R7525
  • PowerFlex Rack R6525
  • PowerFlex Appliance R640
  • PowerFlex Appliance R740xd
  • PowerFlex Appliance R840
  • PowerFlex Appliance R650
  • PowerFlex Appliance R750
  • PowerFlex Appliance R7525
  • PowerFlex Appliance R6525
  • PowerFlex Custom Node R640
  • PowerFlex Custom Node R740xd
  • PowerFlex Custom Node R840
  • PowerFlex Custom Node R650
  • PowerFlex Custom Node R750
  • PowerFlex Custom Node R7525
  • PowerFlex Custom Node R6525

List of supported Coolant Distribution Units (CDU):
  • MotivAir MCDU 4U-T-010 (PLC FW v1.2.3 and BossOne FW v1.14)
NOTE: MotivAir does not support the Containment Policy feature.

NOTE: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
List of supported Power Shelves devices:
  • Delta 21-inch power shelves 33 KW 60A (version 5.11)
NOTE: The Delta 21-inch power shelf does not support IPv6 for any functionality in OpenManage Enterprise. An IPv4 address is required for peforming the discovery and monitoring operation.
  • Lite-On 21-inch power shelves* 33 KW (version 2.0.9)

List of supported Power Distribution Unit (PDU) devices:
  • APC by Schneider Electric rack PDU 2G (support rPDU2 SNMP OIDs .1.3.6.1.4.1.318.1.1.26)
  • Dell PDU (H98NW)
  • Server Technology PDU: Model C3WG36RL-DQJE2MT2

List of supported Uninterruptible Power Supply (UPS) devices:
  • APC by Schneider Electric (Smart UPS with SNMP interface version 1 and version 2)

NVIDIA GPU cards for PowerEdge 14G and later PowerEdge servers are supported in Power Management. For more information about the supported models, see PowerEdge server GPU matrix.

Lists the chassis and the input/output aggregators which support IOA template deployment.

Table 7: IOAs supported by OpenManage Enterprise
PowerEdge Chassis devices Supported IOAs Managing device configurations and deployment Dell Networking OS version
PowerEdge M1000e MIOA No OS9
PowerEdge FX2s FN2210S Yes OS9
PowerEdge FX2s FN410S Yes OS9
PowerEdge FX2s FN410T Yes OS9

List of supported Non Dell servers:
  • HPE servers having Integrated Lights-Out 5 (iLO 5)
  • Lenovo servers having XClarity Controller (XCC)

NOTE:
  • Double asterisk (**) indicates that discovery and inventory, monitoring and device alerts operation takes place during the corresponding chassis operation.
  • An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 8: Network devices supported by OpenManage Enterprise
Networking devices Dell networking minimum OS version
E3248PXE-ON* SONiC
E3248P-ON* SONiC
E3248TE-ON OS10
MX5108N** OS10
MX7116N** Managed via Modular Edition
MX9116N** OS10
MXG610S** Managed via Modular Edition
MXL 10/40GbE** OS9
N3248TE* OS10.5.2.0
N3248TE*-ON SONiC
S3048-ON OS9
S3248T* SONiC
S4048-ON OS9
S4112F-ON OS10
S4112T-ON OS10
S4128F-ON OS10
S4128T-ON OS10
S4148F-ON OS10
S4148FE-ON OS10
S4148T-ON OS10
S4148U-ON OS10
S4248FB OS10.5.2.0
S4248FB-ON OS10
S4248FBL-ON OS10
S4348F* SONiC
S5148F-ON OS10
S5212F-ON OS10
S5224F-ON OS10
S5224F* SONiC
S5232F* SONiC
S5232F OS10
S5232** OS10
S5248** OS10
S5248F* SONiC
S5248F-ON OS10
S5296F-ON OS10.5.2.0
S5296F-ON OS10
S5448** OS10.5.2.0
S5448F* SONiC
S6010 OS10.5.2.0
S6010-ON OS10
S6100-ON OS9
Z9100 OS10.5.2.0
Z9100-ON OS9
Z9264F-ON OS10
Z9264F OS10
Z9332F SONiC
Z9332F OS10
Z9432** OS10
Z9432* SONiC
Z9432F SONiC
C9010 OS9.14.2.8
C1048 OS9.14.2.8
Z9664F SONiC
Z9864F SONiC OS

Lists the Dell system agents and interfaces that are supported in this version of OpenManage Enterprise.

Table 9: Agents and interfaces supported by OpenManage Enterprise
Agent or interface Supported version
Dell Chassis Management Controller (CMC)
  • PowerEdge M1000e chassis—6.10 and later versions. 
  • PowerEdge VRTX chassis—3.21 and later versions. 
  • PowerEdge FX2 and FX2s sleds—2.21 and later versions.
Dell OpenManage Enterprise Modular Edition For the PowerEdge MX7000 chassis—1.2 and later versions.
iDRAC9 and iDRAC10
  • PowerEdge 14G servers: iDRAC 3.xx series and later versions.
  • PowerEdge 15G and 16G servers: iDRAC 6.xx series and later versions.
  • PowerEdge 17G servers: iDRAC 1.20.50.50 and later versions.
NOTE:
  • All 14G, 15G, and 16G PowerEdge servers: iDRAC 5.10.xx.xx and later versions.
  • License-based features for PowerEdge 17G servers, using iDRAC 10, are supported with firmware version 1.20.50.50 or later.
Dell Repository Manager 3.0 and later versions.
Networking OS
  • OS9 and later versions, except for:
  • Dell Networking Z9000 — 9.7P19 and later versions.
  • Networking OS switches MX5108N, MX9116N—minimum firmware version 10.5 (OS 10).
  • SONiC Switches
NOTE: For a complete list of supported networking devices, refer to Networking device support in this KB article.
HPE iLO Remote Server Management Software BMC firmware version iLO 5 and later.
Lenovo XClarity Controller BMC firmware version 1.00 and later.
SmartFabric Manager (SFM) 2.0 and later. This is a pre-enabled support.

Lists the Cyber Ark versions that are supported in this version of OpenManage Enterprise.

Table 10: Cyber Ark supported by OpenManage Enterprise
OpenManage Enterprise version Supported CyberArk Versions
Version 4.6 CyberArk version 13.2.2

Apache Kafka version 4.1.0 and later.

NOTE:Telemetry data is forwarded only for devices that Power Management supports for metrics collection.

Supported devices: IRC 1.0.0

Lists the hypervisors that are supported on management stations.

Table 11: Hypervisors supported by OpenManage Enterprise
Hypervisor Supported version
VMware vSphere support
  • vSphere ESXi 8.0
  • vSphere ESXi 8.0 U1
  • vSphere ESXi 8.0 U2
  • vSphere ESXi 8.0 U3
  • vSphere ESXi 9.0
Microsoft Hyper-V support on Windows Server
  • Windows Server 2022
  • Windows Server 2025
KVM support on Red Hat Linux
  • Red Hat Enterprise Linux 9.6
  • Red Hat Enterprise Linux 10
Nutanix
  • Nutanix AHV 10.0.1.1
  • AOS: 7.0.1.6 and later
Proxmox
  • Proxmox VE 9.0 and later
OpenShift v4.19.11 and later

Lists the supported operating systems on the managed devices for in-band device management.

Table 12: Operating systems supported by OpenManage Enterprise
Operating systems Discovery and inventory Device alerts Managing device configurations and deployment Driver update Power Management
Windows Server 2022 Yes Yes No Yes Yes
Windows Server 2025 Yes Yes No Yes
NOTE: Driver update is not supported for Windows Server 2025 that have Windows Defender Application Control (WDAC) enabled.
Yes
Azure Stack HCI V2 Yes Yes No No No
Azure Stack HCI 24H2 Yes Yes No No No
ESXi 7.0 Yes Yes No No Yes
ESXi 7.0 U1 Yes Yes No No Yes
ESXi 7.0 U2 Yes Yes No No Yes
ESXi 7.0 U3 Yes Yes No No Yes
ESXi 8.0 Yes Yes No No No
ESXi 8.0 U1 Yes Yes No No Yes
ESXi 8.0 U2 Yes Yes No No Yes
ESXi 9.0 Yes No No No Yes
RHEL 9.6 Yes Yes No No No
RHEL 10 Yes Yes No No No
Ubuntu 22.04.4 Yes Yes No No No
Ubuntu 24.0 Yes Yes No No No
Ubuntu 24.04.1 Yes Yes No No No
SLES 15 SP7 Yes Yes No No No

Table 13: PowerEdge servers supported with Azure Stack HCI 24H2
PowerEdge Generation Supported Platforms
PowerEdge 16G Servers
  • AX-660
  • AX-760
PowerEdge 15G Servers
  • AX-6515
  • AX-7525
  • AX-750
  • AX-650
  • AX-4x00
PowerEdge 14G Servers
  • AX-740XD
  • AX-640

Table 14: PowerEdge servers supported with Windows Server 2025
PowerEdge Generation Supported Platforms
PowerEdge 15G Servers
  • PowerEdge R6515
  • PowerEdge R6525
  • PowerEdge R7525
  • PowerEdge R650
  • PowerEdge R750
  • PowerEdge R450
  • PowerEdge R550
PowerEdge C Series Servers
  • PowerEdge C4140
  • PowerEdge C6420
  • PowerEdge C6620
  • PowerEdge C6615
PowerEdge XR Series Servers
  • PowerEdge XR2
  • PowerEdge XR4510c
  • PowerEdge XR4520c
  • PowerEdge XR7620
  • PowerEdge XR5610
  • PowerEdge XR5610c
  • PowerEdge XR8620t
  • PowerEdge XR8610t

Table 15: Browsers supported by OpenManage Enterprise
Browser Supported version
Mozilla Firefox 52 and later
Google Chrome 58 and later
Microsoft Edge 41.16299 and later

View the supported devices, components, features, and metrics in Power Management.

Table 16: List of supported devices, components, features, and metrics in power management and monitoring
Device type Supported metrics and features
17th generation of PowerEdge servers The following are not supported:
  • Idle server detection
  • System usage metrics
  • FPGA power consumption metrics
  • CPU Utilization
  • I/O Utilization
  • Memory Bandwidth Utilization
  • M7725, XE7745, XE7740, XE9780*, XE9780L*, XE9785*, XE8712*, and XE9785L*—The Power Cap policy and EPR Throttle features are not supported.
16th generation of PowerEdge servers
  • T360 and R360 — Static power policy and the EPR throttle feature are not supported.
  • T160 — Thermal metrics, EPR shutdown feature, and temperature-triggered policy
  • R260 — Power metrics, thermal metrics, EPR shutdown feature, temperature-triggered policy, and system airflow
  • The power cap policy is not supported on 16G XE servers.
  • All other features and metrics are supported.
15th generation of PowerEdge servers
  • R250 and T150 — Thermal
  • R250 and T150 — Thermal
  • R350 and T350 — Power and Thermal
  • T550 — Power, thermal, policy, CPU, I/O utilization, and memory bandwidth utilization
  • Maximum, minimum, and average overall memory power consumption
  • Maximum, minimum, and average overall CPU power consumption
  • Maximum, minimum, and average fan power consumption
  • Maximum, minimum, and average storage power consumption
  • Maximum, minimum, and average FPGA power consumption
14th generation of PowerEdge servers All features and metrics are supported
PowerEdge M1000e, VRTX, FX2, and FX2s chassis
  • Maximum, minimum, and average power
  • Instant temperature
  • Energy consumption
PowerEdge MX7000 chassis
  • Maximum and minimum power
  • Maximum and minimum temperature
  • Energy consumption
PDU
  • Instant power
  • Energy consumption
UPS
  • Output power
  • Output energy
  • Battery temperature
Non-Dell servers
  • Maximum, minimum, and average power
  • Instant temperature
GPUs
  • Thermal alert state
  • Power break state
  • Power supply status
  • Reset recommended state
NOTE:The GPU metrics feature is not supported on a PowerEdge XE8712 and PowerEdge XE9780 server.
NOTE:The GPU inventory features is not supported on a PowerEdge XE8712 server.

Minimum, maximum, and average of:

  • Power consumption
  • Primary temperature
  • Memory temperature
  • Secondary temperature
  • Board temperature
  • Usage
  • Total SM Usage Time
  • SM Compute Ratio
  • SM Warp Ratio
  • Tensor Core Usage
  • Clock Frequency
  • Memory Usage
  • Memory Bandwidth Usage
  • HMMA Usage
  • Memory Clock Frequency
  • Clock Event Factors
  • Throttle Duration Thermal
  • Throttle Duration Power
  • PCIe RX Throughput
  • PCIe TX Throughput
  • PCIe Link Speed
  • PCIe Correctable Error Count
  • DBE Retired Pages
  • SBE Retired Pages
  • Error Count TX Wait
PSUs
  • Minimum, maximum, and average of Power Supply - Current
  • Minimum, maximum, and average of Power Supply - Thermal
CPUs Minimum, maximum, and average of CPU Socket - Thermal
PowerFlex PowerFlex device monitoring is supported. PowerFlex device management such as policy and EPR is not supported.
Coolant Distribution Unit (CDU)
  • Only Rack management is supported.
  • The Automatically create physical hierarchy feature is not supported.
Power Shelf The following metrics are supported:
  • Input voltage (PSU)
  • Input current (PSU)
  • Output voltage (PSU)
  • Output current (PSU)
  • Total power shelf input power (group-level) and total input power (device-level)
  • Total power shelf output power (group-level) and total output power (device-level)
Software for Open Networking in the Cloud (SONiC) Switch The following metrics are supported: Instant temperature, instant power, and energy consumption.
NOTE:
  • Modular servers do not support System Airflow values.
  • The minimum and maximum values that are reported by MX7000 chassis for power and temperature metrics are the lowest and highest values that are ever encountered by the chassis for the respective metrics since the last time these metrics are reset in OpenManage Enterprise Modular. The current values might not reflect the actual value of these metrics at a specified time interval.

Productos afectados

Dell EMC OpenManage Enterprise
Propiedades del artículo
Número del artículo: 000364705
Tipo de artículo: How To
Última modificación: 09 ene. 2026
Versión:  1
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.