Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

OneFS: Under rare situations, Mellanox cards, 40G, and Inifiniband, may stop responding to commands

Resumen: OneFS: Under rare situations, Mellanox cards, 40G, and Inifiniband, may stop responding to commands.

Este artículo se aplica a   Este artículo no se aplica a 
Consulte recursos para

Síntomas



An internal error in the Mellanox 40 Gb or InfiniBand card may cause the card to fail. When failure occurs, the interface no longer responds to commands, such as ifconfig or pciconfig. In addition, when this issue occurs, and the card is configured for an external network. Flexnet and smartconnect are unable to assign IP addresses to the interface.
 
Footprints of the failure are seen in the messages file, include the following syntax:     
 
Errors indicating that the driver can no longer post commands:      
Notice the driver number  mlx4_core1:     
mlx4_core1: mlx4_cmd_post:cmd_pending failed

           Or
 
Indication of Internal error detected:     
Notice the driver number  mlx4_core1:     
2018-12-26T16:31:34-08:00 <0.7> isilon-1 /boot/kernel.amd64/kernel: mlx4_core1: Internal error detected:
2018-12-26T16:31:34-08:00 <0.7> isilon-1 /boot/kernel.amd64/kernel: mlx4_core1:   buf[00]: ffffffff
.
.
2018-12-26T16:31:34-08:00 <0.3> isilon-1 /boot/kernel.amd64/kernel: mlx4_en mlx4_core1: Internal error detected, restarting device

Causa

This occurs when there are Cisco BiDi QSFP+ Optics in use with this card. The optic can produce up to 3.5 W of power while the NIC can only accept a maximum of 1.5 W of power. Since the margin is too great for the input rail to handle, the NIC stops functioning causing the node to panic.

Resolución

Workaround: Use non-BiDi optical cable to avoid over use of power.

Solution: Shut down the node and replace the NIC. Replacement NICs are available with a larger fuse and power capacity.

Información adicional

This content is translated in different languages:
https://downloads.dell.com/TranslatedPDF/AR-SA_530469.pdf
https://downloads.dell.com/TranslatedPDF/DE_530469.pdf
https://downloads.dell.com/TranslatedPDF/ES_530469.pdf
https://downloads.dell.com/TranslatedPDF/ES-XL_530469.pdf
https://downloads.dell.com/TranslatedPDF/FR_530469.pdf
https://downloads.dell.com/TranslatedPDF/IT_530469.pdf
https://downloads.dell.com/TranslatedPDF/JA_530469.pdf
https://downloads.dell.com/TranslatedPDF/KO_530469.pdf
https://downloads.dell.com/TranslatedPDF/NL_530469.pdf
https://downloads.dell.com/TranslatedPDF/PT_530469.pdf
https://downloads.dell.com/TranslatedPDF/PT-BR_530469.pdf
https://downloads.dell.com/TranslatedPDF/RU_530469.pdf
https://downloads.dell.com/TranslatedPDF/SV_530469.pdf
https://downloads.dell.com/TranslatedPDF/ZH-CN_530469.pdf
https://downloads.dell.com/TranslatedPDF/ZH-TW_530469.pdf

Productos

Isilon Gen6, Isilon HD400, Isilon NL410, Isilon S210, Isilon X210, Isilon X410