Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat
Nous contacter
Certains numéros d’article ont peut-être changé. Si ce n’est pas ce que vous recherchez, essayez de faire une recherche sur tous les articles. Rechercher des articles

Numéro d’article: 000141846

Troubleshooting P2314T and P2714T monitors

Résumé: This article has information on P2314T and P2714T Monitors .

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article

Symptômes

SLN268364_en_US__11371133302803.NoteUser Manuals for reference to locate the buttons mentioned in the instructions.

 

Using the Monitor Self-Test

Monitors provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run Monitor Self-test.

  1. Turn off both the computer and the monitor.
  2. Unplug all video cables from the back of the monitor.
  3. Turn on the monitor. The floating dialog box would appear on-screen if the monitor cannot sense a video signal but is working properly.
  4. This box will also appear during normal system operation if the video cable is disconnected or damaged.

 

If the monitor continues to be blank after verifying that the self-test works, then the issue might be with the video cable /video adaptor or the computer itself.
For further assistance Contact Technical Support.

Cause

Using the Built-In-Diagnostics

Monitors have a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent issue with the monitor/video cable or the computer.

  • Enable:
    • Unplug the video cables from the computer or monitor; The monitor then goes into the self-test mode.
    • Press Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
    • By pressing Button 4 to change the color which will be changed in gray, red, green, blue, black, white and text screens.
  • Disable:
    • The test is complete when the text screen appears. To exit, press Button 4 again.
    • The program will return to normal display when there is no action for 5 minutes.

 

To run a diagnostic test on integrated functions required for appropriate display, you may access Dell PC Diagnostics. Select Hardware and then Video Card or Video Card Stress.
Alternatively, for further assistance Contact Technical Support

Touch Screen Issues

  1. Monitor fails to respond to touch.
    1. Ensure the USB cable connected to the monitor was provided by Dell.
    2. The computer should support USB 2.0 or USB 3.0
    3. If the USB device is not recognized by the computer, power off/on the monitor or plug out/in the USB cable.
  2. The cursor does not accurately follow your finger when you touch the screen (Win 8)
    1. Restart the computer and the monitor
    2. Enter Control Panel and choose Tablet PC Settings
    3. Select Display and then Calibrate
    4. Recalibrate the monitor screen following the text instructions on the screen.
    5. Either save or discard the calibrate data.
  3. The cursor moves erratically
    1. Ensure nothing is blocking the optics of the touch screen such as protection film.
    2. Clean the panel surface; Ensure there is no dirt, dust, oil or finger prints
    3. Move metal objects or conductive items away from the screen.

If you note any/all of the above symptoms, Contact Technical Support.

Résolution

HDMI/ DP-No Audio Issue

In order to resolve this issue, make sure

  1. Make sure all the cables are connected (DP or HDMI cable)
  2. Volume is not on mute for the computer
  3. Computer audio setting is same as Monitor audio setting

 

If the issue persists, Contact Technical Support.

USB Interface is not working

  • Ensure the monitor is turned on
  • Reconnect the upstream cable between the monitor and the computer
  • Reconnect the downstream connectors. Between the monitor and the peripheral device being used.
  • Restart the computer and the monitor.
  • Connect the peripheral devices and check for resolution; If issue persists Contact Technical Support.

 

 

 

Propriétés de l’article

Produit concerné

Dell P2314T, Dell P2714T

Dernière date de publication

10 mai 2021

Version

4

Type d’article

Solution

Haut de la page