Data Domain - DD Retention Lock causa l'errore dei backup di CommVault Impossibile impostare l'ora di accesso ai file

Résumé: I backup di Commvault si bloccano con errori "Cannot set file access time" e "Cannot mark file" quando Data Domain Retention Lock è abilitato.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.

Symptômes

Dai registri di CommVault 

egrep 'Cannot set the access time of the file' *
5912  16e0  03/14 13:14:28 39714925 89335656-66296274 [MEDIAFS    ] RealMagneticFS Created <\\x.x.x.x\xxxxxxxxx_cvlt_hs_win_30days_repl\xxxxxx_Folder1\CV_MAGNETIC\V_24431218\CHUNK_xxxxx7588> file
5912  16e0  03/14 13:14:28 39714925 89335656-66296274 [DSBACKUP   ] Archive File creation succeeded Type: 16 SubType: 131 Status: 0 EventErrorCode: 0
5912  16e0  03/14 13:14:28 39714925 89335656-66296274 [DSBACKUP   ] Archive File creation succeeded Has been Sent
5912  19e8  03/14 13:14:28 39714925 89335656-66296274 [DSBACKUP   ] Job Update Interval seconds   [300]S
5912  c0c   03/14 13:14:28 39714925 89335656-66296274 [MEDIAFS    ] SetFileValidData is not supported on this path. Code [87]. Current Offset [0x0000000000000000], Chunk increment size [134217728]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_RECEIVER] Recieved close for ARCHIVE FILE ID = [224722928]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_BASE    ] Going to close chunk for archive File [224722928] The current size of the chunk is [217752447 ]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [MEDIAFS    ] RealMagneticFS::FinalizeChunkForBackup: Setting the end of file to offset [0x000000000D000000]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [MEDIAFS    ] Cannot set the access time of the file [\\x.x.x.x\xxxxxxxxx_cvlt_hs_win_30days_repl\xxxxx_Folder1\CV_MAGNETIC\V_24431218\CHUNK_569777588]. Time [133555148680000000], Error [5].
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [MEDIAFS    ] Cannot mark the file [\\x.x.x.x\dc19900dd0100_cvlt_hs_win_30days_repl\xxxxxx_Folderx\CV_MAGNETIC\V_24431218\CHUNK_569777588] as read only.
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [MEDIAFS    ] CloseSpecific Failed to close the Media Handle - VolId=24431218
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_BASE    ] Error handler: Setting JPR for [errorType - 1] [Error-code - 996] [Error-module - 218104071] [Event-ID - 1040187703] [Handler type - 218104061]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_BASE    ] setting job pending reason [job-ID - 39714925] [job type - 1] [Argument count - 3]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_BASE    ] **ERROR** Failed to close the Chunk on Media. ArchiveFile=224722928 ChunkId= 569777588
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DM_RECEIVER] DataReceiver::Close: Error: DataWriter Close Failed. ArchFileId [224722928]
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DSBACKUP   ] Failed to Close Archive File
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DSBACKUP   ] ERROR! Failed to close Archive file Type: 16 SubType: 132 Status: 102 EventErrorCode: 117440531
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DSBACKUP   ] ERROR! Failed to close Archive file Has been Sent
5912  33b4  03/14 13:14:30 39714925 89335656-66296274 [DSBACKUP   ] [error] occured [handled - yes]


Dai registri ddfs.info DD 

First grep for the chunk in DDFS and then get the file handle. 
grep "CHUNK_xxxxx7588" ddfs.info.7
03/13 22:26:36.837110 [7facfe393c50] FM fm_dm1_open:3690 - Create: /data/col1/xxxxxxxx_cvlt_win_30days_repl/xxxx_Folder1/CV_MAGNETIC/V_24429117/CHUNK_xxxxx7588, FH: ---->5700bc:0:xxx:0:xxx:xxxxx:0:<--------:0:(0:99436), tag: 0, cp_uuid = c85bf3507bxxxxxx:67d1086dbxxxxx


Grep for file handle. 
grep "5700bc:xxxxxxxxxxxxxxx" ddfs.info.7
03/13 22:26:36.837110 [7facfe393c50] FM fm_dm1_open:3690 - Create: /data/col1/xxxxxxxx_cvlt_hs_win_30days_repl/xxxxxx_Folder1/CV_MAGNETIC/V_24429117/CHUNK_xxxxx7588, FH: 5700bc:0:xxxxx:0:xxxx:xxx:0:(0:99436), tag: 0, cp_uuid = c85bf3507xxxxx:67d1086dbxxxxx
03/13 22:27:52.381294 [7facfb801050] Attempt to set atime of file 5700bc:0:xx:x:xxxxx:xxxxx:0 to less than minimum retention period of mtree

 

Cause

CommVault sta tentando di impostare atime su un valore inferiore a (Current time) + (Retention-lock min-retention-period).
 

Résolution

Ridurre il periodo di retention minimo o impostare Commvault in modo che l'atime sia successivo rispetto al valore attuale impostato.
 

Informations supplémentaires

https://community.commvault.com/self-hosted-q-a-2/difference-between-retention-lock-enabling-worm-compliance-lock-6540 [community.commvault.com] ">Questo link ipertestuale indirizza a un sito web esterno a Dell Technologies.

https://documentation.commvault.com/2023e/expert/configuring_worm_storage_lock_and_compliance_lock.html [documentation.commvault.com] ">Questo link ipertestuale indirizza a un sito web esterno a Dell Technologies.

Retention Lock, Compliance Lock, Software WORM, WORM Copy → Tutti questi elementi si riferiscono alla stessa protezione WORM a livello di software CommVault. Blocca l'eliminazione di job, client, backup set o subclient con processi validi e impedisce inoltre la riduzione dei periodi di retention.
Prima della versione 11.30, utilizzare la console Java per abilitare WORM a livello di copia della policy di storage. In alternativa, utilizzare il flusso di lavoro Retention Lock per tutte le copie in un pool di storage.
Dalla versione 11.30 in poi, l'opzione è stata rinominata 'Compliance Lock" per evitare confusione con lo storage WORM ed è disponibile in Command Center e Java Console nelle proprietà del pool di storage. Selezionare l'interruttore "Compliance Lock" sul pool di storage per abilitare questa operazione. 
 
Storage WORM → Si riferisce alla protezione WORM a livello di hardware (lato vendor di storage). Con questa opzione, i dati vengono bloccati sul lato storage per impedire eventuali eliminazioni e modifiche dirette dal lato storage.
Abilitiamo automaticamente "Compliance Lock" quando lo storage WORM è abilitato per impedire modifiche alla retention in modo da allinearsi al blocco lato storage. 
Prima, 11.30 → utilizzo "Enable WORM Storage" flusso di lavoro per abilitare questa opzione.
Dalle 11:30 → abbiamo esposto questa opzione sia in Command Center che nella console Java nelle proprietà del pool di storage. Per abilitare questa opzione, cliccare su "WORM Storage" nel pool di storage. 

Produits concernés

Data Domain
Propriétés de l’article
Numéro d’article: 000223195
Type d’article: Solution
Dernière modification: 15 janv. 2026
Version:  2
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.