Connectrix B-Series Firmware: FOS user authentication works but has no permissions when configuring authentication
Résumé: While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Instructions
Symptom: User logs in correctly but has no user permissions to run any commands.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Produits concernés
ConnectrixProduits
Connectrix B-Series HardwarePropriétés de l’article
Numéro d’article: 000022769
Type d’article: How To
Dernière modification: 07 Jan 2026
Version: 4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.