Dell Unity: Ftp-server dwingen binaire modus te gebruiken (op te lossen door gebruiker)
Résumé: Bij het uploaden van tekstbestanden naar de FTP-server van Unity, kan het formatteren van bestanden ongeldig worden vanwege het verschil tussen Windows- en Unix-/Linux end-of-line (EOL)-tekens. Windows gebruikt twee tekens, CR+LF terwijl Unix/Linux alleen LF gebruikt. Standaard gebruikt de FTP-server van Unity de ASCII-overdrachtsmodus en aangezien Unity een Unix/Linux-basis gebruikt, worden alle EOL-tekens geconverteerd naar LF. Hierdoor lijken bestanden te zijn verbroken bij het lezen van een Windows-client. Om dit gedrag te voorkomen, moeten bestanden worden geüpload via de overdrachtsmodus van de bin. Dit zorgt ervoor dat het bestand wordt overgedragen "as is" zonder wijzigingen. Dit kan ook handig zijn bij het overdragen van image-, audio- en videobestanden, omdat ze ook binaire modus vereisen om beschadiging te voorkomen. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Instructions
Om de FTP-server van Unity te dwingen binaire overdrachtsmodus te gebruiken, gebruikt u deze opdracht:
spa:~/user# svc_nas ALL -param -facility ftpd -modify forceBinXfer -value 1
param ftpd.forceBinXfer added into the list of visible params
SPA : done
Warning 17716815750: SPA: U moet de SP opnieuw opstarten om forceBinXfer-wijzigingen door te voeren.
De SP moet opnieuw worden opgestart om de wijziging van kracht te laten worden.
spa:~/user# svc_nas ALL -param -facility ftpd -modify forceBinXfer -value 1
param ftpd.forceBinXfer added into the list of visible params
SPA : done
Warning 17716815750: SPA: U moet de SP opnieuw opstarten om forceBinXfer-wijzigingen door te voeren.
De SP moet opnieuw worden opgestart om de wijziging van kracht te laten worden.
Deze opdracht kan worden gebruikt om de huidige configuratie te controleren:
spa:~/user# svc_nas ALL -param -facility ftpd -l
SPA:
param_name facility default current configured
forceBinXfer ftpd 0 1 1
SPB:
param_name facility default current configured
forceBinXfer ftpd 0 1 1
Informations supplémentaires
Zie artikelnummer 490733 voor meer informatie over NAS-parameters.
Produits concernés
Dell EMC Unity, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500
, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
Propriétés de l’article
Numéro d’article: 000216708
Type d’article: How To
Dernière modification: 29 nov. 2023
Version: 3
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.