The Secure Boot Error Message Prompts During the Restore Process
Résumé: An Ubuntu 20.04 device with Dell Client Agent - Enabler (DCA Enabler) configured encounters a Secure Boot error message that is displayed while the operating system restore is in process. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
Affected Products:
- Most products shipping with Ubuntu 20.04 with DCA Enabler configuration
Note: Observed mostly on products that have an NVIDIA driver
User performs recovery option on the device and the device starts the restore process, then the below message is displayed. The device is stops responding and cannot progress.
Figure 1: (English Only) Error message received during Ubuntu recovery process
Cause
This issue is happening because the Dell Recovery Tool detects the device to be a Dell Hybrid Client computer while recovery and during Ubuntu Base operating system install it skips some scripts (relevant to Secure boot pre-apply configuration to backup existing signature keys). Then, it tries to reenable the Secure boot which results in the above dialog being displayed for NVIDIA driver component devices. The workflow should be to install standard Ubuntu for a DCA Enabler.
Résolution
To resolve this:
- Once the user is on the above screen, shut the device down, and then power the device back on.
- While restarting, disable secure boot manually from the BIOS, save, and exit.
Note:
- This process varies depending on the device.
- The device reboots.
- Once restarted, the restore process should continue.
Produits concernés
Dell Hybrid ClientPropriétés de l’article
Numéro d’article: 000195379
Type d’article: Solution
Dernière modification: 30 sept. 2024
Version: 4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.