Export a SupportAssist Collection over iDRAC7 and iDRAC8
How to export the Tech Support Report (TSR) / SupportAssist Collection over the Dell iDRAC7 & iDRAC8 user interface.
Résumé:How to export the Tech Support Report (TSR) / SupportAssist Collection over the Dell iDRAC7 & iDRAC8 user interface.
Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.
Contenu de l’article
Symptômes
iDRAC7 and iDRAC8 SupportAssist utility can create a SupportAssist collection, also known as Technical Support Report (TSR). iDRAC provides an application interface for gathering platform information that enables support services to resolve platform and system problems. iDRAC generates a SupportAssist collection of the server and then exports the collection to a location on the management station (local).
This could be a shared network location such as;
FTP
Trivial File Transfer Protocol (TFTP)
HTTP
HTTPS
Common Internet File System (CIFS)
Network File Share (NFS)
The collection may be sent to technical support for troubleshooting and inventory collection. The collection generates a standard ZIP file.
iDRAC7 and iDRAC8 firmware version 2.30 and higher
Log in to the iDRAC UI. (Fig.1)
Figure 1: iDRAC UI
Expand Overview → Server → Troubleshooting → SupportAssist. (Fig.1)
Click Edit Collection Data. Select the data to include in the collection. (Fig.1)
Select the data to include in the collection. (Fig.2)
Figure 2: Collection Settings
Operating system and Application Data requires the iDRAC Service Module (iSM) be installed and running. iSM is an optional software application that can include relevant operating system and Application Data in the SupportAssist collection. The Operating System and Application Data option is disabled and not selectable if (1) iDRAC Service Module is not installed.