MD Series: Set HDD offline - MD32xx/MD34xx/MD36xx/MD38xx

Riepilogo: How to set a HDD offline via MDSM

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.
Scopri le altre risorse

Sintomi

If a HDD/SSD is in Status Impending- or Predictive-Failure you have to set these Offline before you swap it. This how to will show you how to do this in the GUI. You also can set a HDD Offline in a attached Expansion-Enclosure (e.g. MD1xxx or MD30xxe).

Causa

-

Risoluzione

  1. Open the Modular Disk Storage Manager (MDSM).
  2. Connect to the relevant storage. 
  3. Click the Tab Hardware.
  4. Mark the hard drive, which shows the impending-status. If it is done, the hard drive will show a blue border stripe.
  5. Now click again on the hard drive with the right mouse-button and choose in the appearing Dialog Box Advanced and then Fail.
    SLN316665_en_US__1HddOff3xxxN
     
  6. The hard drive will went then in failed-status and will be marked with a white X on a red ground.
  7. Now you can swap the hard drive without any problems.
Tip: If you use a Hot Spare it will start a rebuild. (Please note that the rebuild to the hot spare disk will first be completed, before a copy back to the replaced disk takes place) 

Prodotti interessati

Dell PowerVault OEM Ready MD34XX and MD38XX, PowerVault MD3200, PowerVault MD3200i, PowerVault MD3220, PowerVault MD3220i, PowerVault MD3260, PowerVault MD3260i, PowerVault MD3400, PowerVault MD3420, PowerVault MD3460, PowerVault MD3600F , PowerVault MD3600i, PowerVault MD3620F, PowerVault MD3620i, PowerVault MD3660f, PowerVault MD3660i, PowerVault MD3800f, PowerVault MD3800i, PowerVault MD3820f, PowerVault MD3820i, PowerVault MD3860f, PowerVault MD3860i ...
Proprietà dell'articolo
Numero articolo: 000124770
Tipo di articolo: Solution
Ultima modifica: 03 nov 2022
Versione:  5
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.