How to collect Drive Log of a ML6000 Tape library

Riepilogo: This article describes the process of generating logs for a ML6000 system.

Prodotti interessati

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.

Scopri le altre risorse

Sintomi

In case of an issue sometimes a Log from one or more Drives is needed. Below you can find two descriptions how to do this via Web interface.

Causa

Intended use.

Risoluzione

Stop all running jobs of your backup software and wait until the Library is idle.

Connect to the library via the web interface and sign in.

Standard user: admin
Standard password: password

SLN316909_en_US__2ML6Drv1

SLN316909_en_US__3ML6Drv2

Within „Tools" select „Drive Operations".
SLN316909_en_US__4ML6Drv3

Choose "Retrieve tape drive log" and confirm with "Next".
SLN316909_en_US__5ML6Drv4

In that window select the Drive from which you want to export the log by enable the checkbox and confirm with "Next".
SLN316909_en_US__6ML6Drv5

Confirm the Downloads with "Apply"
SLN316909_en_US__7ML6Drv6

At this massage confirm again with "OK".
SLN316909_en_US__8ML6Drv7

SLN316909_en_US__9ML6Drv8

SLN316909_en_US__10ML6Drv9

After the Log was collected you will get a download via the Browser.

If you need the log from a different drive go back to the drive-selection and choose the next one.

Please note that the download of the logs from a drive can takes some time to complete. A faster way with IBM drives is with the PowerVault - How to create a log with ITDT (IBM Tape Diagnostic Tool).