VNX: Cómo conectar la misma interfaz CIFS que NFS al mismo VDM
Samenvatting: Solo es posible conectar la misma interfaz CIFS que NFS al mismo VDM mediante los comandos de la CLI.
Dit artikel is van toepassing op
Dit artikel is niet van toepassing op
Dit artikel is niet gebonden aan een specifiek product.
Niet alle productversies worden in dit artikel vermeld.
Instructies
Conéctese al protocolo SSH de Control Station.
Para ver las interfaces conectadas como CIFS o NFS, aplique el siguiente comando:
$nas_server -i -v
Ejemplo:
migadmin@nla3v1stor003 ~]$ nas_server -i -v PROD_VDM
id = 1
name = PROD_VDM
acl = 0
type = vdm
server = server_2
rootfs = root_fs_vdm_PROD_VDM
I18N mode = UNICODE
mountedfs = Prod_Perf,Prod_Space,Prod_Perf_2,Prod_Perf_3
member_of =
status :
defined = enabled
actual = loaded, active
Interfaces to services mapping:
interface=Prodperf :cifs
interface=nl0123nas0001_390 :cifs
interface=nl0123nas0002_390 :cifs
interface=Prodspace :cifs nfs
El ejemplo anterior muestra el nombre de la interfaz “nl0123nas0002_390” está conectado solo como CIFS y el nombre de la interfaz “Prodspace” se conecta como CIFS y NFS.
Para conectar la misma interfaz CIFS que NFS, aplique el siguiente comando:
$nas_server - vdm -attach
Ejemplo:
migadmin@nla3v1stor003 ~]$ nas_server -vdm PROD_VDM -attach nl0123nas0002_390
id = 1
name = PROD_VDM
acl = 0
type = vdm
server = server_2
rootfs = root_fs_vdm_PROD_VDM
I18N mode = UNICODE
mountedfs = Prod_Perf,Prod_Space,Prod_Perf_2,Prod_Perf_3
member_of =
status :
defined = enabled
actual = loaded, active
Interfaces to services mapping:
interface=Prodperf :cifs
interface=nl0123nas0001_390 :cifs
interface=nl0123nas0002_390 :cifs nfs
interface=Prodspace :cifs nfs
Para ver las interfaces conectadas como CIFS o NFS, aplique el siguiente comando:
$nas_server -i -v
Ejemplo:
migadmin@nla3v1stor003 ~]$ nas_server -i -v PROD_VDM
id = 1
name = PROD_VDM
acl = 0
type = vdm
server = server_2
rootfs = root_fs_vdm_PROD_VDM
I18N mode = UNICODE
mountedfs = Prod_Perf,Prod_Space,Prod_Perf_2,Prod_Perf_3
member_of =
status :
defined = enabled
actual = loaded, active
Interfaces to services mapping:
interface=Prodperf :cifs
interface=nl0123nas0001_390 :cifs
interface=nl0123nas0002_390 :cifs
interface=Prodspace :cifs nfs
El ejemplo anterior muestra el nombre de la interfaz “nl0123nas0002_390” está conectado solo como CIFS y el nombre de la interfaz “Prodspace” se conecta como CIFS y NFS.
Para conectar la misma interfaz CIFS que NFS, aplique el siguiente comando:
$nas_server - vdm -attach
Ejemplo:
migadmin@nla3v1stor003 ~]$ nas_server -vdm PROD_VDM -attach nl0123nas0002_390
id = 1
name = PROD_VDM
acl = 0
type = vdm
server = server_2
rootfs = root_fs_vdm_PROD_VDM
I18N mode = UNICODE
mountedfs = Prod_Perf,Prod_Space,Prod_Perf_2,Prod_Perf_3
member_of =
status :
defined = enabled
actual = loaded, active
Interfaces to services mapping:
interface=Prodperf :cifs
interface=nl0123nas0001_390 :cifs
interface=nl0123nas0002_390 :cifs nfs
interface=Prodspace :cifs nfs
Getroffen producten
VNX1 Series, VNX2 Series, VNX5100, VNX5150, VNX5200, VNX5300, VNX5400, VNX5500, VNX5600, VNX5700Producten
VNX5800, VNX7500, VNX7600, VNX8000Artikeleigenschappen
Artikelnummer: 000192930
Artikeltype: How To
Laatst aangepast: 23 okt. 2025
Versie: 3
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.