ECS：服務主控台：IP 位址變更後「靜態路由驗證失敗」

Resumo: 服務主控台：IP 位址變更後「靜態路由驗證失敗」

Este artigo aplica-se a Este artigo não se aplica a Este artigo não está vinculado a nenhum produto específico. Nem todas as versões do produto estão identificadas neste artigo.
Confira outros recursos

Sintomas

IP 位址已變更。

變更後，服務主控台執行狀況檢查失敗，並顯示錯誤 「靜態路由驗證」失敗。 
20200205 17:23:52.703: |   Static routes validation
INFO: On node 1XX.2XX.1.1 NAN managed static routes configured for networks: ['mgmt']
20200205 17:23:54.563: |   | FAIL (1 sec)
[ERROR] 'Static routes validation' failed: [1XX.2XX.1.1]: Command failed: 'sshpass ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o ServerAliveInterval=30  -T  root@1XX.2XX.1.1 $'(1>&2 echo connect7); wicked ifstatus public.mgmt 2>&1' < /dev/null'
Output:
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ea
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
      leases:   ipv6 auto granted
      addr:     ipv4 10.1.2.3/24 [static]
      route:    ipv4 10.4.5.6/27 via 10.1.2.1 [static]
      route:    ipv4 10.4.5.7/27 via 10.1.2.1 [static]
      route:    ipv6 default via fe80::218:74ff:fe1c:8640 metric 1024 proto ra
 
在上述範例中，已變更網路分隔的 IP 位址，啟用 public.mgmt。

介面的 wicked ifstatus 顯示 裝置未執行。

若要檢查此項目，請執行下列命令 - 租約顯示： ipv4 static 失敗 
viprexec -if ~/VDCLIST wicked ifstatus <interface name> |grep <interface name> -A 4

admin@node-a:~> viprexec -if ~/VDCLIST wicked ifstatus public.mgmt |grep public.mgmt -A 4
Output from host : 1XX.2XX.1.1
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ea
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.2
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:eb
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.3
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ec
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.4
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ed
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed

Causa

靜態路由是在 public.mgmt 介面上配置的。

Resolução

執行以下命令以檢視靜態路由：    
getrackinfo -t

admin@node-a:~> getrackinfo -t
Static route list
=================
Node ID      Network            Netmask                  Gateway           Interface     
1                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
1                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
2                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
2                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
3                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
3                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
4                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
4                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
在上述範例中，假設舊路由為 10.1.2.23，屬於 Secure Remote Services （SRS） 閘道，而新路由則為 11.2.3.4。

現在，它無法使用舊路由重新啟動邪惡的介面。必須先移除路由。

警告：在刪除之前，請務必驗證此路由上沒有生產流量運行。刪除錯誤的路由可能會導致 DU。在刪除任何路由之前獲取執行此操作更改的許可權！

雙方同意後，刪除舊路線。

您可以一次移除一個路由，或透過建立包含所有命令的檔案來移除。命令是：     
sudo setrackinfo --static-route-del <node id> <destination> <netmask> <gateway> <interface>
或者，直接從 getrackinfo -t

的輸出中複製並貼上 例如，建立一個檔案：     
vi delete-old-routes
輸入要執行以下目標的路由清單：     
sudo setrackinfo --static-route-del 1                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 2                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 3                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 4                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
儲存檔案並使其可執行：     
chmod +x delete-old-routes
執行檔案：     
./delete-old-routes
Wicked 介面現在應變更為 up： 
viprexec -if ~/VDCLIST wicked ifstatus <interface name> |grep <interface name> -A 1
viprexec -if ~/VDCLIST wicked ifstatus public.mgmt |grep public.mgmt -A 1
Output from host : 1XX.2XX.1.1
public.mgmt     up
Output from host : 1XX.2XX.1.2
public.mgmt     up
Output from host : 1XX.2XX.1.3
public.mgmt     up
Output from host : 1XX.2XX.1.4
public.mgmt     up

Produtos afetados

ECS Appliance

Produtos

ECS Appliance, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
Propriedades do artigo
Número do artigo: 000058102
Tipo de artigo: Solution
Último modificado: 26 abr. 2024
Versão:  4
Encontre as respostas de outros usuários da Dell para suas perguntas.
Serviços de suporte
Verifique se o dispositivo está coberto pelos serviços de suporte.