Latitude Systems May Not Detect Intel 5450 SSD When Waking from Low-Power State
Summary: This article provides information about a firmware update available to resolve sleep and standby issues on your Latitude laptop with Intel 5450 SSD.
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
The Dell Latitude laptops may not detect the Intel 5450 SSD installed in the system when waking from a low-power state, sleep, or standby. The drive can be recovered from the failed state by power cycling the system. The following section provides steps to take to resolve it.
Cause
No cause information
Resolution
Firmware update LHFD04N has been released to resolve this issue and is available on the Dell Support Site from the following direct link:
Intel SSDSC2KF128/256/512G8 and SSDSCKKF128/256/512G8 Series Solid State Drive Firmware Update.
You can also find the upgrade by going to Dell Support Drivers & Downloads. Make sure that your system model is chosen, then choose Serial ATA from the Category drop-down menu. The Intel SSDSC2KF128/256/512G8 and SSDSCKKF128/256/512G8 Series Solid State Drive Firmware Update appears in the list of available downloads.
Produse afectate
LatitudeProprietăți articol
Article Number: 000125331
Article Type: Solution
Ultima modificare: 18 iul. 2024
Version: 6
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.