How to Map the Battery Information in BIOS or Dell Command Power Manager to the Result of Battery Health Meter Utility on Latitude
Summary: See the table in Instructions section to map the battery health information in BIOS or Dell Command | Power Manager to the result of Battery Health Meter (BHM) utility on Latitude.
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Instructions
| Level | Battery Information in BIOS | BHM Meter | Definition |
|---|---|---|---|
| Level 1 | Excellent | Normal | This state is measured by battery health being greater than or equal to 65%. "Normal" batteries in this state may have up to a 35%-reduced operational time even after the battery is 100% charged. |
| Level 2 | Good | Caution State I | This occurs when battery health is less than 65% but greater than 50%. "Reduced Life" of up to 49% loss in operational time can occur even after the battery is 100% charged. |
| Level 3 | Fair | Caution State II | This happens when battery health is less than or equal to 50% but greater than 25%. "End of Usable Life" of 50% or more loss in operational time can occur even after the battery is 100% charged. |
| Level 4 | Poor | Replacement State I Replacement State II |
This occurs when battery health is less than or equal to 25%. "Insufficient Power" is typically the error message displayed. This happens when a problem with the battery occurs. "Permanent Failure" is the error message displayed. |
Produse afectate
LatitudeProprietăți articol
Article Number: 000149753
Article Type: How To
Ultima modificare: 21 nov. 2024
Version: 4
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.