printer Skriv ut

Kundvy


save failed to authenticate with nsrmmd on host : Timed out..

Artikelnummer: 534251
Version: 3
Artikeltyp: Break Fix
Senaste publicering: 12 Mar 2020
Sammanfattning: Backup are failing with timeout error
Problem


Backup failing with below error:
 
175297:save: Unable to set up the direct save with server 'NW_server_name': 
Unable to connect to the storage node on host <storage_node_name>: 
save failed to authenticate with nsrmmd on host <NW_server_name>: Timed out..
Orsak
nsrmmd was in hung state, and the server parallelism was set 32 (default); due to which no additional processes could be started for backups. The existing jobs were failing with timeout error.
Upplösning
Stop NetWorker services to remove all the processes in hung state. Kill jobs manually if the process does not stop when services are stopped.
Linux: 
Stop Services: nsr_shutdown
Confirm all processes have stopped and collect the PID of any processes that do not stop: ps -ef | grep nsr
Kill any hung services: kill -9 PID
Start services: service networker start

Windows:
Stop Services: net stop nsrexecd /y
Confirm all processes have stopped and collect the PID of any processes that do not stop: tasklist | findstr nsr
Kill any hung services: taskkill /PID PID /F
Start services: net start nsrd && net start gstd
 
Increase parallelism to higher range and initiate the backup. Server --> Server Properties --> General
Note: View --> Diagnostic View must be enabled:

User-added image
The server parallelism attribute controls how many save streams the server accepts simultaneously. The more save streams the server can accept, the faster the devices and client disks run. Client disks can run at their performance limit or the limits of the connections between them. The default Server parallelism is 32 you can configure the parallelism up to 1024. When increasing values it should follow: 32, 64, 128, 256, 512, 1024.

Server parallelism is not used to control the startup of backup jobs, but as a final limit of sessions accepted by a backup server. The server parallelism value should be as high as possible while not overloading the backup server itself.
 
Anteckningar
Bilagor
Artikelegenskaper
Första publicering Wed Jun 05 2019
12:59:51 GMT
Primär produkt
NetWorker 9.2.1
Produkt
NetWorker,NetWorker 9.2.1