Skip to main content
  • Розміщуйте замовлення швидко і легко
  • Переглядайте замовлення та відстежуйте свій статус доставки
  • Створення списку своїх продуктів і доступ до нього

Networked Printer Portal Properties and IP Address Troubleshooting in Windows Vista

Summary: Refer to the information in each section for your Laser or Inkjet printer on how to troubleshoot networked printers in Windows Vista.

Ця стаття стосується Ця стаття не стосується Ця стаття не стосується якогось конкретного продукту. У цій статті зазначено не всі версії продукту.

Symptoms


Refer to the Laser or Inkjet section for information on troubleshooting networked printers in Windows® Vista®.

SLN149486_en_US__1icon Note: As of April 11, 2017, Windows Vista customers are no longer receiving new security updates, non-security hotfixes, free or paid assisted support options, or online technical content updates from Microsoft. This article will no longer be updated and remains for information only. Please visit the Microsoft site for the full end of support statement.

Table of Contents:

Please choose whether you have a Laser printer or Inkjet printer.

  1. I Have an Inkjet Printer
  2. I Have an Laser Printer
  3. Opening the Login Page of the Router
 
 

1. Inkjet Printers

  1. Make sure the computer can access the Internet.
     
  2. Make sure the portal properties and IP address settings are correct.

      To check the portal properties and IP settings, perform the following steps:
    1. Click the Start button.
    2. Click Control Panel.
    3. Click Printer or Printers.
    4. Right-click the desired printer.
    5. Click Properties.
    6. Click Ports.
    7. Make sure there is check mark next to the desired printer that has the printer model followed by (Network) listed in the Printer column.
    8. Click Configure Port.
    9. Click on the desired printer.
    10. Click Configure.
    11. Make sure Obtain IP Address Automatically is selected.
    12. Click OK.
    13. Click Close.
    14. Click Close again on the printer properties window.
     
  3. To prevent your router from giving the printer different IP addresses (and possibly loose connection), it is recommended that you configure the router to always give the printer the same IP address. That process differs from router to router, refer to the wireless router documentation or contact the wireless router manufacturer, for more information on accessing the router, refer to the Opening the Login Page of the Router section.
     
  4. Once the router has been configured, power off the printer for 1 minute and then back on.
     
  5. Restart the computer.
 

Back to Top


 

2. Laser printers

  1. Make sure the computer can access the Internet and print a Network Configuration Report from the printer, for more information on how, refer to the user's guide. Refer to Dell Knowledge Base article Downloading and Viewing Printer Manuals for information on how to download and view the user's guide.
     
  2. Make sure the portal properties and IP address settings are correct.

      To check the portal properties and IP settings, perform the following steps:
    1. Click the Start button.
    2. Click Control Panel.
    3. Click Printer or Printers.
    4. Right-click the desired printer.
    5. Click Properties.
    6. Click Ports.
    7. Make sure there is check mark next to the desired printer listed in the Printer column.
    8. Click Configure Port.
    9. Make sure the Host Name or IP address listed next to Printer Name or IP address: is the same as the Host Name or IP address listed on the Network Configuration Report.
      (If not change the Host name on the Configure Standard TCP/IP Port Monitor window.)
    10. Click OK.
    11. Click Close.
     
  3. To prevent your router from giving the printer different IP addresses (and possibly loose connection), it is recommended that you configure the router to always give the printer the same IP address. That process differs from router to router, refer to the wireless router documentation or contact the wireless router manufacturer, for more information on accessing the router, refer to the Opening the Login Page of the Router section.
     
  4. Once the router has been configured, power off the printer for 1 minute seconds and then back on.
     
  5. Restart the computer.
 

Back to Top


 

3. Opening the Login Page of the Router

  1. Click Start.
     
  2. Click Control Panel.
     
  3. Click Switch to Classic View in the upper-left corner when available.
     
  4. Double-click Network and Sharing Center.
     
  5. Click View status.
     
  6. Click Details.
     
  7. Locate and write down the IP address to the right of IPv4 Default Gateway.
     
  8. Open an Internet browser.
     
  9. In the address bar, type http://[Default_Gateway_ip_address], where [Default_Gateway_ip_address] is the Default Gateway IP address you just wrote down (do not include the brackets).
     
  10. Log into the router. For some of the most common router user name and passwords, refer to Table 1.
     
    Manufacture User Name Password
    Linksys SLN149486_en_US__2iC_External_Link_BD_v1
     
    leave blank admin
    D-Link SLN149486_en_US__2iC_External_Link_BD_v1
     
    admin leave blank
    Netgear SLN149486_en_US__2iC_External_Link_BD_v1
     
    admin password
    2Wire SLN149486_en_US__2iC_External_Link_BD_v1
     
    None unless one was set up. None unless one was set up.
    Belkin SLN149486_en_US__2iC_External_Link_BD_v1
     
    None leave blank
    Apple SLN149486_en_US__2iC_External_Link_BD_v1
     
    Use the AirPort utility  
    SMC  SLN149486_en_US__2iC_External_Link_BD_v1
     
    Admin smcadmin
    Table 1: Wireless Manufacture Links, Router Default User Names and Passwords
     

Back to Top


 

Cause

 

Resolution

 
Властивості статті
Article Number: 000135667
Article Type: Solution
Востаннє змінено: 08 черв. 2022
Version:  4
Отримайте відповіді на свої запитання від інших користувачів Dell
Служба підтримки
Перевірте, чи послуги служби підтримки поширюються на ваш пристрій.