Cannot PXE Boot to a Dell USB Type-C to Ethernet Dongle

摘要: This article addresses an issue affecting PXE booting to a Dell USB Type-C to Ethernet dongle.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

Users may be unable to PXE boot with the Dell Type-C to Ethernet dongle. The symptom encountered is that there is no PXE option listed in the F12 boot menu.

    原因

    BIOS configuration.

    解决方案

    The solution is to set the system Fastboot to "Thorough" in the BIOS.  You can find the Options at Post Behavior > Fastboot. For detailed instructions on entering and configuring the BIOS, reference your system manual available for download from the Dell Support website: https://www.dell.com/support/home .

    The following additional configuration changes may be necessary to successfully PXE boot depending on the environment:

    • PXE needs to be enabled under the NIC
    • Current systems will require the UEFI network stack to be enabled
    • IPV4 should be enabled and IPV6 should be disabled (unless the network is configured for IPV6)

    受影响的产品

    Alienware, Inspiron, OptiPlex, Vostro, XPS, G Series, G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Latitude Tablets, Surface, XPS Tablets, Fixed Workstations, Mobile Workstations
    文章属性
    文章编号: 000148936
    文章类型: Solution
    上次修改时间: 21 5月 2025
    版本:  10
    从其他戴尔用户那里查找问题的答案
    支持服务
    检查您的设备是否在支持服务涵盖的范围内。