跳转至主要内容
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表

How to Run the Dell D1918H, D2421H, D2421DS, and D2721H Monitor Self-Test

摘要: The following article provides information about running the self-test on Dell D1918H, D2421H, D2421DS, and D2721H monitors.

本文适用于   本文不适用于 

说明

Monitor Self-Test

The self-test (integrated diagnostic tool) helps you determine if any screen abnormality you experience is an inherent problem with: (For example: Your monitor, video cable, video card, driver, or computer.)


Steps for running the self-test:

  1. Disconnect all video cables from the monitor and turn off your monitor.

  2. Turn on the monitor.

  3. When the Dell logo disappears and the screen shows "No signal," press buttons 2 + 3 + 5 (Figure 1) on the monitor simultaneously.
    D-Series Monitor Buttons

    The monitor enters the self-test screen.

  4. Carefully inspect the screen for abnormalities as the display turns to red, green, blue, black, and white automatically.

  5. Press button 5 to exit the self-test screen.


If you do not detect any screen abnormalities while using the self-test tool, the monitor is functioning properly. Check your video cable, video card, drivers, and computer.


Back to Top

 

其他信息

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

受影响的产品

Dell D1918H, Dell D2421H, Dell D2721H
文章属性
文章编号: 000188980
文章类型: How To
上次修改时间: 20 9月 2024
版本:  9
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。