Dell Unity: Alert 14:b20080 TLSv1.0 and TLSv1.1 are not secure. It is recommended that you use TLSv1.2

摘要: After an upgrade (NDU) to Unity OS 5.4.0.0.5.094, an alert is generated for "TLSv1.0 and TLSv1.1 are not secure. It is recommended that TLSv1.2 is used. See KB 000022527 for information about how to disable TLSv1.0 and TLSv1.1" ...

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

After an upgrade (NDU) to Unity OS 5.4.0.0.5.094, an alert 14:b20080 is generated for TLSv1.0 and TLSv1.1 are not secure. It is recommended that you use TLSv1.2. See KB 000022527 for information about how to disable TLSv1.0 and TLSv1.1"

screenshot of TLS 1 is not secure alert

 
 

原因

This is a new alert that was added to the Unity OS 5.4.0.0.5.094 release to warn customers that TLSv1.0 and TLSv1.1 are not secure and can pose a security risk when used.  A future Unity OS release disallows the use of TLSv1.0/1.1.

解决方案

It is recommended that customers disable TLSv1.0/1.1 and use TLSv1.2.  See KBA 000022527 Dell Unity: How to Disable TLS 1.0 and 1.1 on Unity Array (User Correctable) for instructions on disabling TLSv1.0/1.1.
 
NOTE:
UEMCLI clients 5.0.2 and earlier do not support TLSv1.2. If TLSv1.1 is disabled on Unity, the old UEMCLI clients cannot connect with Unity. Upgrade to UEMCLI client version 5.0.3 or above to ensure support for TLSv1.2.
 
NOTE:
There is a rare issue where Dell Unity arrays upgraded from Unity OS 4.2 (or earlier) code may still attempt to use TLSv1.0 even when it is disabled due to a Unisphere rolemapping file not being updated properly.  See KBA 000035540 Dell Unity: Unisphere UI fails to log in as LDAP User when TLS1.0 is disabled with message "The logged in user is not authorized to access Unisphere" (Dell Correctable)

受影响的产品

Dell EMC Unity, Dell EMC Unity Family
文章属性
文章编号: 000223686
文章类型: Solution
上次修改时间: 25 7月 2025
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。